control upgrade
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137837
Printed Date: 19 Jul 2025 at 12:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: control upgrade
Posted By: DMiller
Subject: control upgrade
Date Posted: 27 Apr 2017 at 1:24pm
|
I had converted the old Allis to a single control but never liked the amount of stroke and the overall efficiency of the mechanism. I came up with this, will see how well [IF] it functions.
 |
Replies:
Posted By: michale34
Date Posted: 27 Apr 2017 at 2:02pm
| seems like the 7g we had the the 2 sticks just like the 6g did im might be wrong now I know for sure the 7gb had one stick. that's a nice looking job dave |
Posted By: DMiller
Date Posted: 27 Apr 2017 at 3:24pm
| G-B did have single, but the hydraulics layout was also different with the control valves on the side not top of tank. This brings a lot of hand movement down to minimal. |
Posted By: michale34
Date Posted: 27 Apr 2017 at 3:54pm
| I bet it helps . on that 6g when you go to raise and lower the boom if you forget to push it back in the middle going down it will keep going and pick the machine up lol |
Posted By: DMiller
Date Posted: 27 Apr 2017 at 5:26pm
| My machine has the return to dig detents, when you pull full back it latches in and the linkage alongside the lift mechanism trips the bucket then drives the bucket back down. If you do not catch it the loader will try to raise the tractor. Is suspect that was in allowance of the multiple levers and redirection of the machine requiring BOTH hands, one for clutches one for shifter. |
Posted By: DMiller
Date Posted: 03 May 2017 at 7:00am
|
With the reman'd bucket on the control is a lot crisper and shorter throw than what I had made prior. Still a learning process on use or getting used to it. |