Allis Chalmers 33 Corn Picker Help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137543
Printed Date: 05 Oct 2025 at 5:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers 33 Corn Picker Help
Posted By: jpessek
Subject: Allis Chalmers 33 Corn Picker Help
Date Posted: 19 Apr 2017 at 7:39am
|
My brother and I are going to pick up a 33 corn picker tomorrow, does anyone have some pictures of the brackets that go on the tractor for it? We want to make sure we find everything. ------------- www.allischalmersarchive.com Your Source Of Free Vintage Allis Chalmers Brochures Available For Downloading |
Replies:
Posted By: Robert Musgrave
Date Posted: 19 Apr 2017 at 12:23pm
| No pictures, but IIRC, there are brackets that hang from the rear drop axles, and brackets that hang from the frame rails, step pulley w/ V-belt drive and notched lever, mud scraper on the front tires, a window screen-type affair for the radiator, the engine side panels, and a small screen that goes over the air cleaner inlet. There may be more. R. Musgrave |
Posted By: Bull
Date Posted: 19 Apr 2017 at 1:19pm
|
Also brackets that mount to fender mountings on the axles to support the elevator. Don't forget the front half of the PTO shaft. ------------- WD45 Diesel, RC,CA,IB, B, G, 616, Early B-10, D-10, Terra Tiger, 95G spreader, SC blade |
Posted By: Roger Mn
Date Posted: 19 Apr 2017 at 6:19pm
| also replace glass sediment bowl with a metal one |
Posted By: DON G
Date Posted: 23 Apr 2017 at 8:13am
 I think we have the rear mounting brackets also the piece of tin for under the radiator and steel gas bowl if able to locate.
|
Posted By: grinder220
Date Posted: 23 Apr 2017 at 9:35am
| There's a different cylinder bracket for the right side used to raise and lower the picker, I'm sure I have an extra laying around if you need one. Also on the left side there's a bracket that holds the other cylinder up out of the way which I need but haven't found one yet. |