Print Page | Close Window

WHAT IS IT?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137448
Printed Date: 08 Nov 2025 at 4:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WHAT IS IT?
Posted By: HVFDFIREFIGHTER
Subject: WHAT IS IT?
Date Posted: 16 Apr 2017 at 5:22pm
Does anyone know what this part is?  I remember taking it off the left side (as sitting on tractor) floor board.  Can't remember how to put it back on or what it actually does. I might even have it put together wrong in this picture.  Any help would be appreciated.




Replies:
Posted By: chuck (WI)
Date Posted: 16 Apr 2017 at 5:26pm
I think its a bracket that holds the hydrolic lines. What tractor was it on.


Posted By: HVFDFIREFIGHTER
Date Posted: 16 Apr 2017 at 7:55pm
Sorry, I should have mentioned, it is a D14.


Posted By: DSeries4
Date Posted: 16 Apr 2017 at 8:20pm
Yep.  That is the securing bracket for the return hydraulic line.  You do have it put together wrong.  L shaped piece comes down against line on one side and the U piece butts against it with the line in the middle.  Also should be a rubber piece to prevent vibration wearing the line down.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: chuck (WI)
Date Posted: 17 Apr 2017 at 12:37am
That's what it is. Usually the rubber is brittle one falling apart and no good, so I just find a piece of rubber round tubing that fit's over the hydraulic pipe and cut it to fit, looks good and works like a charm.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net