Farm Equipment - 210 fueling adjust

Print Page | Close Window

210 fueling adjust

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136830
Printed Date: 08 Nov 2025 at 11:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 210 fueling adjust

Posted By: navyrunfarm
Subject: 210 fueling adjust
Date Posted: 30 Mar 2017 at 10:03pm

hey all. wanting to turn fuel up just a little on my 210 for chisel plowing. need advice on how to do it. thanks!

Replies:

Posted By: tbran
Date Posted: 31 Mar 2017 at 3:11pm

turn out the torque screw - it is the screw under the plastic cap sticking out at a 45 degree angle pointing back toward the steering wheel on the same plane as the throttle shaft but on the rear of the top of the pump-it is the only screw not parallel or perpendicular to the plane of the pump area. Remove seal, warranty is out, loosen jam nut , insert allen screw, and turn out couple of turns, tighten jam nut - do not over tighten. If it has already been done - likely - it is like if you have to ask, don't do it - have a pro do it .. a seized pump head is a terrible thing to waste...

-------------
When told "it's not the money,it's the principle", remember, it's always the money..