Print Page | Close Window

B restoring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136497
Printed Date: 08 Nov 2025 at 11:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: B restoring
Posted By: Dave Wisc.
Subject: B restoring
Date Posted: 22 Mar 2017 at 1:07pm
Made a big mistake on the restoration of my B. I did not plan on doing this much of a restore of it at this time , but I am going to. Problem is I am cleaning the engine so question is if I clean the engine with gas and air dry it can I just prime over this or spray it with something else. Thanks Dave



Replies:
Posted By: Dans 7080
Date Posted: 22 Mar 2017 at 1:10pm
Use a prepping solvent to clean it before you prime it.

-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door


Posted By: Dick L
Date Posted: 22 Mar 2017 at 2:31pm
The paint will most likely peal in a year or so. After cleaning you will need to rough it up to get the paint to bond.   After roughing it up you should wipe it down with grease and wax remover. Paint thinner will work most of the time.


Posted By: Bill Long
Date Posted: 22 Mar 2017 at 2:34pm
This discussion is way over my head.  
However, I hope you listen closely to the experts.  I am looking to see another of my favorites restored.
Good Luck!
Bill Long



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net