Farm Equipment - Sleeve orings on 190

Print Page | Close Window

Sleeve orings on 190

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136437
Printed Date: 08 Nov 2025 at 4:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Sleeve orings on 190

Posted By: chuck (WI)
Subject: Sleeve orings on 190
Date Posted: 20 Mar 2017 at 11:17pm

In my IT manual is says to coat sleeve orings with light motor oil and install quickly. I see there is a lot of controversy using petroleum products, just wondering if oil is OK or what you folks are using.

Replies:

Posted By: wayneIA
Date Posted: 21 Mar 2017 at 12:22am

I use vegetable oil, if you use motor oil you have to very quick before they start expanding.

Posted By: Allis dave
Date Posted: 21 Mar 2017 at 6:50am

The only time I ever installed orings, I used John Deere oring lubricant. That's some very slippery stuff

Posted By: Lonn
Date Posted: 21 Mar 2017 at 8:11am

Dish soap works good too but you gotta flush the block or you'll think something's wrong when your engine starts foaming at the mouth

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot