Followed Me Home
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=136327
Printed Date: 08 Nov 2025 at 11:56am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Followed Me Home
Posted By: Travis2766
Subject: Followed Me Home
Date Posted: 17 Mar 2017 at 4:26pm
 The wife said it's alright to keep it! All crop 66, I'm sure I'll have lots of questions. ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |
Replies:
Posted By: DennisA (IL)
Date Posted: 17 Mar 2017 at 7:00pm
|
Very nice, one more save from the scrap yard. Even has a Scour-Klleen. ------------- Thanks & God Bless Dennis |
Posted By: Ryan Renko
Date Posted: 17 Mar 2017 at 7:56pm
| I agree with Dennis!! always nice to see one saved and put back to use!! Ryan |
Posted By: Travis2766
Date Posted: 17 Mar 2017 at 8:06pm
|
Should be safe for the next 30 or so years! ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |
Posted By: Bill Long
Date Posted: 17 Mar 2017 at 8:43pm
|
Delighted to see another All Crop saved. I remember when I hitched them to the pickup we used an offset hitch. Made for wobbling at higher speed. However, it worked. Looks good. Let us know how it goes. Good Luck! Bill Long
|
Posted By: littlemarv
Date Posted: 17 Mar 2017 at 9:00pm
|
Well, where'd you get it, how much you give for it, what does it need, and what are you going to use it for? Yes I'm nosy. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: Travis2766
Date Posted: 17 Mar 2017 at 9:40pm
|
Got it just north of Amherst in central Wi., which fortunately for me was only about 10 miles from my house. Needs a new lower draper, the reel rebuilt and the concave patched (has some holes). Been kept outside for the last few years so some rust holes are not a surprise. Got it for $400 which I'm not sure if that's a decent price for around central Wisconsin or not but being close made it a lot easier to spring for it. I'll be using it this summer/fall on some oats, soybeans and going to try it on sunflowers (trying to lower my chicken feed costs). ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |
Posted By: DougS
Date Posted: 18 Mar 2017 at 6:34am
|
I saw the topic and thought a blonde followed Travis home. |
Posted By: Travis2766
Date Posted: 18 Mar 2017 at 7:19am
Nice Doug! I don't think the wife would let me keep that! Plus I think I would have to post that under the "Wife gave me a black eye" topic for even asking!  ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |
Posted By: Ted J
Date Posted: 18 Mar 2017 at 11:06am
NICE FIND!! I've only seen one around here and it was in pieces. SOME pieces......   ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Travis2766 wrote:Posted By: WD45
Date Posted: 18 Mar 2017 at 11:18am
|
Doug Nice fine - is this a model 66 All Crop? Dad bought a new All Crop 66 in 1954 with 18 bu bin , straw chopper and scour kleen . Will work nice behind your D17. Good luck. ------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H |
Posted By: Travis2766
Date Posted: 18 Mar 2017 at 12:08pm
Serial number B6583, anyone help me out with the year? Definitely needs new sheet metal on the concave (last picture)   ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |
Posted By: PaulB
Date Posted: 18 Mar 2017 at 2:55pm
|
I have some screens for the Scour-Kleen available. Send a PM if interested.
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: littlemarv
Date Posted: 20 Mar 2017 at 2:32pm
|
Is there a lot of tongue weight on a 66? I guess I thought they looked pretty balanced, header in front of the axle, all the walkers and shoe and everything else behind the axle, grain bin and cylinder above the axle, seems like a good setup. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: Travis2766
Date Posted: 20 Mar 2017 at 2:53pm
|
No, It seems to be pretty well balanced so it did bounce up and down a lot. ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |
Posted By: littlemarv
Date Posted: 20 Mar 2017 at 3:14pm
|
I have to pull one about 20 miles. I have been building an offset hitch for it. Just seeing your first picture helps me out, I was worried about the PTO shaft hitting the bumper or tailgate but it looks like it will hang straight down at the u-joint, so that should be alright. ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: dawntreader74
Date Posted: 20 Mar 2017 at 6:11pm
| i made a clamp on hitch to clamp on the bumper on the rider side' to pull one home' same as the ones that u-haul used back in the day' works slick. |
Posted By: Farmerhg
Date Posted: 20 Mar 2017 at 8:56pm
| I may be wrong,but looks like a model 60 to me. |
Posted By: Travis2766
Date Posted: 20 Mar 2017 at 9:23pm
|
I tied the pto shaft back to the support for the shaft and it stayed just fine, at first I thought it was a 60 also but the pickup is 66 inches wide, that and the 6 batt reel that was an option on the 60 but standard on the 66 are the only noticeable differences (if I've done my homework properly), unless it's a "big bin" 66 then their are some other differences. ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |
Posted By: CrestonM
Date Posted: 20 Mar 2017 at 10:11pm
|
Looks nice! Pull those patches off the concave, and take another pic. That would be interesting to see. What I find to be the most amusing is the way the bats are on the wrong sides of the reel arms. Lol I have a combine similar to that- small bin, but 6 bat reel and header with flares. Mine is a 60A with a 66 header because the serial number starts with a "A". ALL 66 serial numbers start with a "B". (B does not indicate Big Bin like some think)\ I'm glad you're saving it from the scrapper! I'm a sucker for these All-Crops, and I've already got 6 (three 60A's, 1 Camel Back, 1 BB 66, and a Super 100). Two of them are in my possession, and 4 I still need to get around to hauling to the ranch from various places. One of them is residing in MN for the time being.
|
Posted By: littlemarv
Date Posted: 22 Mar 2017 at 7:53pm
http://s1380.photobucket.com/user/rsommer11/media/IMG_20170322_190829483_zpsp8tr9uak.jpg.html" rel="nofollow"> ------------- The mechanic always wins. B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H |
Posted By: combinechris
Date Posted: 24 Mar 2017 at 8:13pm
|
The 1953 models or the first year of production of the 66 has the 60 bin. 1954 and up they are the 25 bu. Big Bin. If you have questions or looking for parts Travis2766 just pm me. ------------- 35 combines and 15 forage harvesters. mostly allis combines and equipment.WTB 2 row cornhead for a 90 |
Posted By: Bob J Wi
Date Posted: 25 Mar 2017 at 8:47am
|
For Paul B I would be interested in your scour clean screens Mine is 10" diameter and 23" long. Has the "K" pattern Let me know Thanks |
Posted By: Bob J Wi
Date Posted: 25 Mar 2017 at 8:55am
|
I have one of these for parts. It is a 66 small bin Reel has 6 batts and sides flare out 3 inches on sides along draper If you need parts let me know. |
Posted By: shameless (ne)
Date Posted: 25 Mar 2017 at 9:01am
| when I saw that his wife said he could keep it....I wondered if it was the truck or the combine! |
Posted By: Travis2766
Date Posted: 25 Mar 2017 at 9:19pm
|
Definitely the combine, that's her truck! Way too nice to be my truck. ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66, Rotobaler. |