Farm Equipment

Print Page | Close Window

G carb

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135744
Printed Date: 07 Nov 2025 at 2:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: G carb

Posted By: randy
Subject: G carb
Date Posted: 03 Mar 2017 at 12:43pm

Been working a carb off a G. I put a new kit, gaskets and needle and seat, but it keeps running over after i shut it off. The float doesnt leak, i tried a different float from another carb, same thing. Tried to adjust float height, still leaks. I am going to try the old needle and seat this afternoon, it doesnt have the rubber tip on the needle and try it.

Any ideas out there? It leaked berore and thats why i got the kit.

Thanks, Randy

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070

Replies:

Posted By: Lon(MN)
Date Posted: 05 Mar 2017 at 7:22am

Had a carb for a different tractor that leaked. Found that the gasket on the seat was leaking due to a pitted gasket surface. Just something I look for when rebuilding.

Posted By: randy
Date Posted: 05 Mar 2017 at 9:09am

Thanks, will check that out.

-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070