Allis Chalmers 5015 Help
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134321
Printed Date: 06 May 2025 at 9:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers 5015 Help
Posted By: ACwd15
Subject: Allis Chalmers 5015 Help
Date Posted: 26 Jan 2017 at 6:36pm
Hello, I have been looking at buying my "old" compact tractor back, my father sold it in late 2014. but then I regretted it, I found it online and only 20 minutes from me, last time I had it the engine knocked but still ran, Is there ANY!!! website online that offers a COMPETE engine rebuild kit or even just Crank Bearings! here is a photo of it, i repainted it myself. 
|
Replies:
Posted By: Dnoym N. S. Can.
Date Posted: 26 Jan 2017 at 6:54pm
|
fyi Allis-Chalmers 5015 18 hp (13 kW) Yanmar same as Hinomoto C174 ... For further information, see Hitachi Tierra. Tractor Models built by Hinomoto for other companies Model Year(s) Produced Horsepower Engine Type Misc Notes Photo Allis-Chalmers 5015 18 hp (13 kW) Yanmar same as Hinomoto C174 and Simplicity 9518 Simplicity 9518 18 hp (13 kW) same as Allis-Chalmers 5015 http://gardentractortalk.com/forums/topic/37081-a-little-on-the-hinomoto/" rel="nofollow - http://gardentractortalk.com/forums/topic/37081-a-little-on-the-hinomoto/ HTH B:-) Dnoym |
Posted By: Gary Burnett
Date Posted: 26 Jan 2017 at 7:43pm
|
No parts supply for those Hinomoto except for a dealer having some NOS as far as I can find out.I bought a Massey Ferguson 220-4(basically the same as the AC 5030) cheap because the owner couldn't find front end parts.I put a 2WD front off a parts AC 5020 I have on it.Pretty good tractor but if it breaks......... |
Posted By: ACwd15
Date Posted: 26 Jan 2017 at 7:51pm
| Yes I knew it was based off a Japan Tractor, so only NOS and used parts? where can i find them. I know someone bought out Hinomoto can't remember who though. |
Posted By: DougG
Date Posted: 26 Jan 2017 at 7:54pm
| Id start it up and see how long the engine knocks, give it some fuel and see if it quits, Ive got one just like it and knocks like a bitch at first start but clears up, |
Posted By: Bill Deppe/AC Salvag
Date Posted: 26 Jan 2017 at 7:57pm
| How much difference between a 5015 engine and a 5020? Have one for salvage. It's 2wd and no sheet metal |
Posted By: ACwd15
Date Posted: 26 Jan 2017 at 8:15pm
| Alot Bill, the 5020 is 25 hp while 5015 is 18. different size and stroke/bore motors. |
Posted By: ACwd15
Date Posted: 26 Jan 2017 at 8:17pm
| Well i don't own it at the moment, i am trying to buy it back from a guy that is "Parting" it out. No wonder why there so rare. i think he said the engine is stuck..... |
Posted By: EPALLIS
Date Posted: 26 Jan 2017 at 8:28pm
| I think I might have a 5015 shop manual in an A-C binder. Let me know if you might be interested and I'll look for it. Thanks. |
Posted By: Gary Burnett
Date Posted: 27 Jan 2017 at 12:46am
From what I've found out the 5020 and 5030 engines are the ones that are very similar and will interchange. |
Bill Deppe/AC Salvag wrote:Posted By: Gary Burnett
Date Posted: 27 Jan 2017 at 12:53am
I know as far back as around 2002 Bud Yingling had a 5020 in his shop and he had to order a piston for it from Japan.The story I heard was the factory in Japan was destroyed when they had that giant Tidal Wave back about 10 or so years ago or maybe they just quit making any parts.It happens I have a Bolens that was built by Iseki and sold by Garden Way in the US and the parts situation is the same for that too. |
Posted By: ACwd15
Date Posted: 27 Jan 2017 at 2:21am
Yes,i have the same problem i own a 77 Montgomery wards very hard to find parts for. and a 79 A-body Pontiac car! (Grand LeMans) both very hard to find parts for.
|
Posted By: ACwd15
Date Posted: 28 Jan 2017 at 12:46am
| Is $1200 fair for the tractor? i don't think it is considering parts are so scarce and well its just about the money |
Posted By: Acdiesel
Date Posted: 28 Jan 2017 at 8:10am
|
here's one for sale $1600 link: https://zanesville.craigslist.org/grd/5974626157.html" rel="nofollow - Allis Chalmers 5015  ------------- D19 Diesel,D17 Diesel SER.3 2-D14, 2-D15 SER.II WF/NF D15 SER.2 DIESEL D12 SER.I, D10 Ser.II 2-720'S D21 Ser. II Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: ACwd15
Date Posted: 28 Jan 2017 at 4:54pm
|
Posted By: ACwd15
Date Posted: 29 Jan 2017 at 5:22pm
|
So the guy won't let it go for under 1200, what a ripoff. to get it running again would take Thousands. Guess I'll stick with the older stuff what im good at. Guys like him are Tight Sticks.
 |
Posted By: Lon(MN)
Date Posted: 29 Jan 2017 at 6:52pm
| Maybe I should sell you mine. Worked on it today. Missing the grille and side shield bolts. I have a thousand bolts but no metric, I was hoping the bolt size would be in the service manuel but no luck. Looked for parts on the internet but could not find a site that would give me any information. O well, the good news is I got the snow blower to work. |
Posted By: Charlie175
Date Posted: 30 Jan 2017 at 5:10am
|
Massey Ferguson also sold the same tractor for a good number of years (10). If I remember right it was the 1010 model. Maybe the 1020 was also similar The Hinomoto C142 (same as the 5015) was also imported as a grey market tractor. You could probably find these overseas much easier if you find someone that can navigate the Japanese sites Try http://www.stevenstractor.com/ ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Charlie175
Date Posted: 30 Jan 2017 at 5:20am
|
maybe contact this company and see what you can find http://www.hinomoto.co.za/ They sell in South Africa ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Charlie175
Date Posted: 30 Jan 2017 at 5:25am
|
And lastly: http://www.japanesetractorparts.com ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: Lon(MN)
Date Posted: 30 Jan 2017 at 6:09am
| My operator book says the engine is a Toyosha. Was there an engine choice? |
Posted By: Gary Burnett
Date Posted: 30 Jan 2017 at 7:27am
All had the same brand engine and if anyone can find a parts supplier for those motors/tractors they can make a fortune.A lot of people still paying big $$$$ for those tractors that'll find out they have expensive boat anchors if they break down and need a part of any importance. |
Posted By: ACwd15
Date Posted: 30 Jan 2017 at 7:49am
Exactly, tons of money and years to find parts for that motor unless you can find a right engine to swap and make work with the transmission. Anyhow i passed on it. i think im ready to get back farming with the old stuff. I always wanted a Allis Chalmers Wd with the snap coupler plow and a trip loader
|
Posted By: Gary Burnett
Date Posted: 30 Jan 2017 at 8:47am
|
I'll buy tractors like that but they have to be cheap and running and I'll use them until something happens then use it for parts.I use mostly Fiats,AC and Olivers to farm with can still get most any parts I need for them. |
Posted By: ACwd15
Date Posted: 03 Feb 2017 at 2:19am
Too late the guy told me he already salvaged it down, just selling parts now. It wasn't running engine was stuck, and parts are nearly impossible to find.
|