3 Point adapter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134017
Printed Date: 25 Apr 2025 at 8:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 3 Point adapter
Posted By: TMiller/NC
Subject: 3 Point adapter
Date Posted: 19 Jan 2017 at 8:18pm
|
Is there an adapter to convert a 3 point hitch to a pin hitch? If so does anyone have a picture? Thanks, Tim |
Replies:
Posted By: ctbowles 58
Date Posted: 19 Jan 2017 at 8:24pm
| you can use the SNAP-COUPLER eye and put a pin through it using a U shaped piece on the pin hitch. |
Posted By: TMiller/NC
Date Posted: 19 Jan 2017 at 8:45pm
| I don't have any snap coupler or pin hitch equipment, was thinking of fabricating some type of adapter to attach to disc that would hook up to CA with pin hitch. |
Posted By: steve(ill)
Date Posted: 19 Jan 2017 at 9:13pm
I use something like this... you can put a 2 inch car hitch thru it. I have one end as a ball for the trailer, and the other end flat for pin hitch...... 5/8 inch lock cross pin in center.
 ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 19 Jan 2017 at 9:18pm
|
reading your last post, I get the impression you have 3 point equipment and want to attach it to a drawbar pin on the tractor ? My photo above is to convert a tractor 3 point to a drawbar for dragging equip. ............ but you could do the same, just backward. ------------- Like them all, but love the "B"s. |
Posted By: TMiller/NC
Date Posted: 20 Jan 2017 at 1:00pm
| The disc has a 3 point hitch, I would like to attach to CA with pin hitch and be able to lift it to get to and from point of use and to load on trailer. |
Posted By: rpropst
Date Posted: 20 Jan 2017 at 1:52pm
|
Tim, I have a snap coupler 3 pt adapter. If you want to look at it for ideas or get measurements let me know. 818-291-1757 Richard.
PS I also have part
of a homemade pin hitch 3 pt adapter.
------------- 1950 snap coupler B 1948 WD 1951Ca 1952B 1952adjustable axel B |
Posted By: Dakota Dave
Date Posted: 20 Jan 2017 at 2:17pm
| I bought a pin hitch to three point adapter from tonys tractors for my CA.Iit works great. I also use it on my snap coupler WD45 i just pull the pin out drop the snap coupler bell and pin it in place. Right now it has a 1000 lb. IH 70 snow blower on it. |