What I did with my Allis today
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133517
Printed Date: 09 Jun 2025 at 11:42pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: What I did with my Allis today
Posted By: john0030
Subject: What I did with my Allis today
Date Posted: 07 Jan 2017 at 7:00pm
Until I get a front loader hydraulics setup going...



|
Replies:
Posted By: EPALLIS
Date Posted: 07 Jan 2017 at 7:13pm
Nice! WD always did a nice job blading lanes/driveways. I use to have a WD with a Paulson loader and a $10 JD blade (painted up Persian orange #2 of course) I mounted on the front for a hydraulic snow plow. That also worked great in the winter time!
|
Posted By: john0030
Date Posted: 07 Jan 2017 at 7:17pm
Thanks, I learned to plow wide so the berms don't creep inwards. Got the driveway about 15 feet wide now and have it down to about a 15 minute routine.
|
Posted By: Unit3
Date Posted: 07 Jan 2017 at 7:48pm
You draw a straight line. Your neighbors are going to ask you to do theirs.
------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C
|
Posted By: EricPA
Date Posted: 07 Jan 2017 at 7:51pm
Looks good! I always plowed wide on the windward side for the drifting
------------- Life is tough,but it's tougher when you're stupid. - John Wayne
|
Posted By: caledonian
Date Posted: 08 Jan 2017 at 7:37am
A WD will move a lot of snow. Good job. Nice looking tractor. What year is it?
|
Posted By: Sugarmaker
Date Posted: 08 Jan 2017 at 9:04am
John, Welcome! Good shots of the WD working in the snow. I use a WD at my daughters to keep her drive cleared too. Mine sure doesn't look as good as yours! Regards, Chris
------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
Posted By: john0030
Date Posted: 08 Jan 2017 at 10:31am
Thanks. Its a 51' both the body and engine have 51' serial numbers, so maybe original. She needs some tlc, but projects other than absolutely necessary, will have to wait till spring.
|
Posted By: john0030
Date Posted: 08 Jan 2017 at 10:37am
loud for obvious reasons. New exhaust manifold, new exhaust pipe with rain cap and new wire harness going in this spring. Right now I should be calling her old sparky, yup actual sparks flying out the exhaust manifold ports. real light show at night. She is also wired for original 6v which I am actually happy about. No offense meant to those who have converted to 12.
|
|