Farm Equipment - Model G Front Hub Seal

Print Page | Close Window

Model G Front Hub Seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133506
Printed Date: 15 Jun 2025 at 7:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Model G Front Hub Seal

Posted By: Scott(GA)
Subject: Model G Front Hub Seal
Date Posted: 07 Jan 2017 at 4:14pm

There is a fellow on eBay that is advertising a Front Wheel Oil Seal for an Allis-Chalmers Model G. Here is the http://www.ebay.com/itm/Front-Wheel-Oil-Seal-Allis-Chalmers-G-70800445-DJS11907D-/282305219466?hash=item41bab3cb8a:g:NhoAAOSwUKxYYrTk" rel="nofollow - link .

There is a picture of a seal in this eBay auction that depicts a seal and it has "CR 11907" printed on the seal. Anyone know if a Chicago Rawhide CR11907 seal really is a suitable replacement for part 800445 (Allis-Chalmers Model G Front Hub Seal).

Scott

Replies:

Posted By: PaulB
Date Posted: 07 Jan 2017 at 6:49pm

I can tell you that the original OEM seals that Allis used had three lips on the outer surface of the seal and the inner was a press fit to the spindle. These may fit when pressed into the front hub if the spindle is smooth enough not to eat up the seal rubber.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: JoeM(GA)
Date Posted: 07 Jan 2017 at 7:06pm

Hey Scott, it will work, as will a National #473205. Since no one is making the original style seal at this time (made in reverse with the felt seal riding against the hub) this seal works pretty good. I have them one one of mine now. Since they have to be installed in the hub instead of fitting the spindle shaft, it make installing a bit of a pain, but it's not like you're gonna do it every week!

http://s33.photobucket.com/user/Joecdeere/media/allis%20g/BEC95D5E-B29C-460A-A908-05FD5EBC098C_zps8zfi7tos.jpg.html" rel="nofollow">

http://s33.photobucket.com/user/Joecdeere/media/allis%20g/a%2010_zps0zzk1eij.jpg.html" rel="nofollow">

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB

Posted By: Scott(GA)
Date Posted: 11 Jan 2017 at 2:22pm

JoeM(GA) wrote:

Hey Scott, it will work, as will a National #473205. Since no one is making the original style seal at this time (made in reverse with the felt seal riding against the hub) this seal works pretty good. I have them one one of mine now. Since they have to be installed in the hub instead of fitting the spindle shaft, it make installing a bit of a pain, but it's not like you're gonna do it every week!

Joe (and everybody),

I have a couple of NOS Front Hub Seals (Part # 800445) that I got on eBay years ago. These are not the same construction as the original seals that came with the tractor. They are a National 200935-XB which I can find no mention of on the Interweb.

Scott

Posted By: JoeM(GA)
Date Posted: 11 Jan 2017 at 3:01pm

I've seen those, and the ones with felt instead of the rubber

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB