Farm Equipment - 100 series pto and power director

Print Page | Close Window

100 series pto and power director

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133407
Printed Date: 08 Jun 2025 at 10:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 100 series pto and power director

Posted By: JFREED
Subject: 100 series pto and power director
Date Posted: 04 Jan 2017 at 7:06pm

Have read on a/t that bad things happen to transmissions on 70 series case tractors with power shift. Seems they can't be left in certain gears for stationary pto work like running augers. We use a 180 on the auger and now i am wondering what position the power director should be in while augering? Maybe it does not matter on an allis but am curious. Did not find much info in the manual unless I over-looked it.Thanx,

Replies:

Posted By: jiminnd
Date Posted: 04 Jan 2017 at 8:53pm

My 185 manual says to have both trans and pd in neutral, would think 180 would be same but can't confirm.

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)