Another parts help post
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133141
Printed Date: 08 Jun 2025 at 8:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Another parts help post
Posted By: brews4me
Subject: Another parts help post
Date Posted: 28 Dec 2016 at 4:42pm
|
1958 D14 I need a 220873 PIN, or a few, Drawbar guide. Part # 5, 3/4 diameter In town all i had to try was Ace Hardware, they looked at me like I was crazy. Does anyone know where these can be found online???   |
Replies:
Posted By: brews4me
Date Posted: 28 Dec 2016 at 4:43pm
|
|
Posted By: Jim.ME
Date Posted: 28 Dec 2016 at 5:19pm
| McMaster Carr has a number of different clevis pins to pick from. If you are not looking for an exact match, a pin can be made from a 3/4" grade 5 bolt. Use a bolt with the unthreaded shank long enough to match the pin length, cut the threads off, and drill a hole for the keeper pin where needed. I have tightened a couple of these mountings by truing the holes with a bur bit and making pins from 7/8" bolts. |
Posted By: DiyDave
Date Posted: 28 Dec 2016 at 5:36pm
| I don't see nuthin wrong with the one in the pic. What's the problem? |
Posted By: DSeries4
Date Posted: 28 Dec 2016 at 8:47pm
|
I have my local fab shop make some up whenever I need them (usually when another tractor arrives in the yard).
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: brews4me
Date Posted: 29 Dec 2016 at 12:56am
missin one
|
DiyDave wrote:Posted By: Gary
Date Posted: 29 Dec 2016 at 6:02am
|
MinnParr $20.00 Gary http://www.minnpar.com/partlisting.asp?PartNbr=70220873 |
Posted By: Dave (NE)
Date Posted: 29 Dec 2016 at 10:12am
| I've picked them up at Hutch and/or GOTO in the past. Lad Benes I believe has had some in the past at these shows. Forget what he posts under, be he is on this site. |
Posted By: brews4me
Date Posted: 31 Dec 2016 at 9:21pm
| Found a few in Ill from a member, Thanks all! |