G262/G230 Gasket set
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133137
Printed Date: 05 Nov 2025 at 10:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: G262/G230 Gasket set
Posted By: Baldwinm
Subject: G262/G230 Gasket set
Date Posted: 28 Dec 2016 at 2:59pm
|
Where can I get a full gasket set for a G-262? Diesel sets seem to be plentiful but gas sets are hard to come by without paying over 300. Can I get a diesel set and then just get a separate gas engine head gasket or are there other things different? Engine is a G-230 with a G-262 head
|
Replies:
Posted By: den/southern illinoi
Date Posted: 28 Dec 2016 at 3:14pm
I needed one for a D 15 engine for a fork lift which is different than the tractor D 15 engine gasket set. After calling my 4 AGCO dealers that usually can get most of these items and could not find a set, I went to my local NAPA and asked. They ordered it in and the search was over. So I guess I'm saying, try NAPA (ours is very friendly with these older engines so your NAPA my not have the same results). Den
-------------
Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts.
|
Posted By: Baldwinm
Date Posted: 28 Dec 2016 at 3:28pm
|
Napa does have a full set but its for a diesel. They only have a head set for gas engines as long as head gasket is the only thing different ill just get both of those.
|
Posted By: TedBuiskerN.IL.
Date Posted: 29 Dec 2016 at 7:48am
Try Minn-par parts, they have many hard to get AC parts if Norm Meinert can't get it. 815-238-4506
-------------
Most problems can be solved with the proper application of high explosives.
|
Posted By: Baldwinm
Date Posted: 30 Dec 2016 at 7:24am
Any input on the diesel set vs gas sets?
|
Posted By: Travis(NE)
Date Posted: 04 Jan 2017 at 8:25pm
|
Off the top of my head the only different gaskets would be the head and intake/exhaust manifold... The front cover or adapter plate may be different depending on application... Is the water pump on the block or head? You could also try www.agcopartsbooks.com and compare the gaskets on a D19 as it is the only tractor that used the G262 and the D262...
|
Posted By: Baldwinm
Date Posted: 05 Jan 2017 at 11:30am
Adapter plate and front cover will be coming off my wd45 230 diesel engine
|
Posted By: Travis(NE)
Date Posted: 05 Jan 2017 at 7:51pm
|
The inner gasket is probably the same between the D230 and the G262, but I doubt the outer gasket between the plate and the cover is the same. I'm not sure you can use the D230 adapter plate with the G262 governor without some modifications...
|
|