Print Page | Close Window

Block Heater on 6060

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133053
Printed Date: 15 Jun 2025 at 5:00am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Block Heater on 6060
Posted By: Eddie
Subject: Block Heater on 6060
Date Posted: 25 Dec 2016 at 8:14pm
Anyone installed a block heater on a 6060? Where did u put it and what kind?

-------------
Allis Chalmers 6060
10' Howse Rotary Cutter
5' Tiller
5' Box Blade
4' Aerator
Ferris Zero Turn Mower W/10' fold up sprayer
John Deere 455 Lawn Tractor
John Deere 955 w/loader &
60" belly mower



Replies:
Posted By: DSeries4
Date Posted: 25 Dec 2016 at 8:28pm
If you have the manifold heater, that should be more than enough to start the tractor in Alabama.  It works for me up in Canada.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080


Posted By: MACK
Date Posted: 25 Dec 2016 at 8:29pm
Agco. They go in rear right corner of block .        MACK


Posted By: Eddie
Date Posted: 26 Dec 2016 at 5:50am
It does not have manifold heater. What size is the one for the right rear of block?

-------------
Allis Chalmers 6060
10' Howse Rotary Cutter
5' Tiller
5' Box Blade
4' Aerator
Ferris Zero Turn Mower W/10' fold up sprayer
John Deere 455 Lawn Tractor
John Deere 955 w/loader &
60" belly mower


Posted By: DougG
Date Posted: 26 Dec 2016 at 7:25am
They're fun to get in with that tube on, done one years ago, May have been easier to split the tractor , but Tbran has a great idea as to use one from a 180 add a nipple and use a hose to pass the water across the back of the block to the oil filter housing


Posted By: JimIA
Date Posted: 26 Dec 2016 at 1:02pm
They do require a special block heater that is only available from AGCO.  There are installation instructions that come with the heater.

Jim


-------------
An open eye is much more observant than an open mouth


Posted By: WNYBill
Date Posted: 27 Dec 2016 at 7:42am
My 6060 has a block heater but it looks aftermarket.  Is there a way to tell if it is the AGCO unit?  It is in the right rear corner of the left side of the tractor.

Bill


Posted By: DougG
Date Posted: 27 Dec 2016 at 6:50pm
It will have a tube brassed on it, looking all nice and neat , Dale put a pic of the factory one  on earlier 


Posted By: Eddie
Date Posted: 28 Dec 2016 at 7:24am
Where can I find this picture?  Thanks

-------------
Allis Chalmers 6060
10' Howse Rotary Cutter
5' Tiller
5' Box Blade
4' Aerator
Ferris Zero Turn Mower W/10' fold up sprayer
John Deere 455 Lawn Tractor
John Deere 955 w/loader &
60" belly mower



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net