Plate with air conditioning mount
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132873
Printed Date: 16 Jun 2025 at 1:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Plate with air conditioning mount
Posted By: tractormanpj
Subject: Plate with air conditioning mount
Date Posted: 20 Dec 2016 at 11:08pm
I have this 7060 in the shop and we were taking all the air conditioning parts off and we were about to take the mount off when it started leaking anti-freeze. Is there a plate made on cabless 7000 series to take the place of the mount there. If so will anyone have a cabless 7000 series parts tractor to sell part to me. This tractor is going to become cabless so just wanted to take all air conditioning components off. Thanks, John ------------- WD 180 190XT 7045 Gleaner S98 |
Replies:
Posted By: Dans 7080
Date Posted: 21 Dec 2016 at 6:03am
|
I took he plate off me 7080 without trouble. You must have another issue going on. ------------- When someone tells you Nothings Impossible, Tell them to slam a revolving door |
Posted By: jaybmiller
Date Posted: 21 Dec 2016 at 6:11am
|
I'm thinking 1 of the 4 bolts was replaced and it's too long, breaking the casting of the block ? I KNOW if you use too long a bolt to mount the PTO shield on a D14 'bad things' can happen.... I'd put pan under tractor and remove the bolts,only way to find the cause of the problem. Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Mike Kroupa
Date Posted: 21 Dec 2016 at 8:25am
| There's nothing to leak behind that mounting plate. More than likely upper radiator hose is leaking a little where it slides over the neck or thermostat housing is leaking. Seen it many times when temp. gets sub freezing. Good Luck, Mike |
Posted By: tractormanpj
Date Posted: 21 Dec 2016 at 10:55pm
|
Would it be an easy fix? Would it be a costly fix or is it pretty easy to fix? Thanks, John ------------- WD 180 190XT 7045 Gleaner S98 |