Farm Equipment - Oilite pilot bushing for a b

Print Page | Close Window

Oilite pilot bushing for a b

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132852
Printed Date: 02 Oct 2025 at 1:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Oilite pilot bushing for a b

Posted By: Tom Elder
Subject: Oilite pilot bushing for a b
Date Posted: 20 Dec 2016 at 11:46am

I have read here the ih 140 bushing could be found in an oilite model,i can;t seem to find one that says so.I can find them as brass and they do appear to be the right size.Can someone suggest a supplier.
Thanks
Tom

-------------
2 1949bs,one with belly mower one with side sickle bar

Replies:

Posted By: steve(ill)
Date Posted: 20 Dec 2016 at 12:48pm

I don't know the part number, but you can buy a variety of oiled bearings from McMaster Carr... If I could not find the right size, I would buy one that was too small on the inside or too big on the outside and turn down on the lathe to fit.

-------------
Like them all, but love the "B"s.

Posted By: steve(ill)
Date Posted: 20 Dec 2016 at 12:50pm

https://www.mcmaster.com/#oil-impregnated-sleeve-bearings/=15jxoti" rel="nofollow - https://www.mcmaster.com/#oil-impregnated-sleeve-bearings/=15jxoti

-------------
Like them all, but love the "B"s.

Posted By: wfmurray
Date Posted: 20 Dec 2016 at 3:26pm

Starter and generator shop might help you out.

Posted By: DiyDave
Date Posted: 20 Dec 2016 at 6:03pm

Mcmaster-carr, MSC, or Enco, all sell oilite, in 13" lengths, in various diameters...

Posted By: Tom Elder
Date Posted: 20 Dec 2016 at 11:07pm

Thanks to everyone for the help

-------------
2 1949bs,one with belly mower one with side sickle bar