D15 II 3 point?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132091
Printed Date: 06 Jun 2025 at 5:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D15 II 3 point?
Posted By: Tracy Martin TN
Subject: D15 II 3 point?
Date Posted: 01 Dec 2016 at 8:02pm
|
Can someone post a pic of the correct 3 point arms on a series II, D15?I have two of them, and they both have two holes near the end of arm that implement attaches to. The manual doesn't show them. I wondered what they were for? Thanks Tracy ------------- No greater gift than healthy grandkids! |
Replies:
Posted By: MBwcIll
Date Posted: 01 Dec 2016 at 10:39pm
| Not sure about 3 pt, but on SC the two hole are used for lifting front mounted cultivators (both sides). A bracket pulls a rod that raised the cultivator is mounted there using the two holes. Later styles uses the hyld system to raise the front mounted cultivator, but used the RH lift arm (two holes) to mount a depth control rod. Again on SC, not sure about 3 pt. |
Posted By: Butch(OH)
Date Posted: 02 Dec 2016 at 4:44am
Not sure if this shows the detail you need but had this one on my phone. |
Posted By: Tracy Martin TN
Date Posted: 02 Dec 2016 at 8:59am
|
Butch, mine have two holes near the ball. Not sure what they were for. Wondering if they cam from another tractor? Tracy
------------- No greater gift than healthy grandkids! |
Posted By: DennisA (IL)
Date Posted: 02 Dec 2016 at 10:55am
|
Here is what mine look like.
http://s161.photobucket.com/user/caallis/media/D-15/IMG_0898_zpsgezozf2k.jpg.html" rel="nofollow">  ------------- Thanks & God Bless Dennis |
Posted By: Tracy Martin TN
Date Posted: 02 Dec 2016 at 11:10am
|
Dennis, that is the way mine are. What were the holes for? Thanks Tracy
------------- No greater gift than healthy grandkids! |
Posted By: DennisA (IL)
Date Posted: 02 Dec 2016 at 11:12am
I do not know. ------------- Thanks & God Bless Dennis |
Tracy Martin TN wrote:Posted By: Gary
Date Posted: 02 Dec 2016 at 11:15am
|
Move the vertical / adjustable lifting arms
to the outer holes for greater lifting power but shorter travel distance. Gary < ="" ="text/">setTimeout("waitForPageRender()",5000);
|
Posted By: mruhlig77
Date Posted: 02 Dec 2016 at 11:42am
| Tracy..mine also has the one hole...which I use for depth control chains for certain jobs...I think they were intended for the leverage discussed above....they used the same setup on D-10 and 12 which has different geometry...Mark |
Posted By: DennisA (IL)
Date Posted: 02 Dec 2016 at 4:02pm
|
Here is the pictures from a operators manual and parts manual. So the 3 point on my tractor has 2 extra holes for whatever reason. http://s161.photobucket.com/user/caallis/media/D-15/D15%203%20point%202_zpsg6pwon3w.jpg.html" rel="nofollow">  http://s161.photobucket.com/user/caallis/media/D-15/D15%203%20point_zpszvrot7vo.jpg.html" rel="nofollow"> 
------------- Thanks & God Bless Dennis |
Posted By: DSeries4
Date Posted: 04 Dec 2016 at 10:00am
|
Here is how mine looked before I restored it. Looks like the others on this post... http://s526.photobucket.com/user/szalmyr/media/D15%20II/DSC01910.jpg.html" rel="nofollow">  ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: Tracy Martin TN
Date Posted: 04 Dec 2016 at 6:54pm
Dennis, that looks my series I, without the draft control. The series II has the heavy one piece cranks. Also note the position of the lifting arm pivot hole location on the manual and real tractor photo. Definitely two different arms. JMHO, Tracy ------------- No greater gift than healthy grandkids! |
Posted By: DennisA (IL)
Date Posted: 05 Dec 2016 at 9:12am
Yep, the top picture came out of the series II operators manual. The series I manual didn't have any information about a 3 point hitch. The bottom picture is out of the 1966 D-15 parts book and that's the only one listed. ------------- Thanks & God Bless Dennis |