Farm Equipment - Accosta 2 cab

Print Page | Close Window

Accosta 2 cab

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131916
Printed Date: 07 Jun 2025 at 2:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Accosta 2 cab

Posted By: AllisandGleaner
Subject: Accosta 2 cab
Date Posted: 28 Nov 2016 at 6:08am

I have a 7010 and she's got cancer in the cab and was wondering if anyone had one for sale and how much

Replies:

Posted By: Daehler
Date Posted: 28 Nov 2016 at 9:21am

How much cancer? If its flaking some take a wire brush and shine it up then put rustolium rust stop on it. If its too far gone, Cook salvage in Clinton Mo might have a decent one

-------------
8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more!
"IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!"

Posted By: Lonn
Date Posted: 28 Nov 2016 at 1:10pm

Didn't someone on the forum make new cab corners for these cabs at one point?

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: AllisandGleaner
Date Posted: 28 Nov 2016 at 4:43pm

It's major you can fit you hand through the side of the cab

Posted By: DougG
Date Posted: 28 Nov 2016 at 7:14pm

Not really , its all fixable,

Posted By: AllisandGleaner
Date Posted: 28 Nov 2016 at 7:41pm

Yeah but if I found a cheap cab I could that would be easier to fis it that way, cause this one needs to be removed to be fixed

Posted By: shameless (ne)
Date Posted: 29 Nov 2016 at 3:05am

Worthington ag parts in Worthington MN just got a 7010 in for dismantle, there's pic's of it on their web site. it has a cab

Posted By: Wes (VA)
Date Posted: 30 Nov 2016 at 7:15am

Looks like your in sc? Have you heard of greens salvage?

Posted By: AllisandGleaner
Date Posted: 30 Nov 2016 at 5:39pm

No where's that at

Posted By: 7060
Date Posted: 01 Dec 2016 at 7:24am

I made new cab corners to weld in 2 of my tractors before I painted them.

Posted By: Lonn
Date Posted: 01 Dec 2016 at 2:53pm

7060, Got anymore of those corners to sell?

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot