F3 separtor clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131798
Printed Date: 31 Oct 2025 at 2:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: F3 separtor clutch
Posted By: Ben (MI)
Subject: F3 separtor clutch
Date Posted: 25 Nov 2016 at 7:24am
I am hoping someone can tell me how the wires on my F3 separator clutch are supposed to be attached. The diagram in the manual shows the main wiring coming from the harness but not the 2 wires on the clutch itself. There is a yellow wire and a blue wire. They are both screwed to the clutch housing, grounds maybe. The other end of the yellow wire is connected the collar as shown but the blue wire is not connected to anything. The collar has a second connection on it identical to the one the yellow wire is connected to. The blue wire does not reach this connection but it seems to be the only way to do it. Please take a look and let me know what to do. Thanks. ------------- Part time farming with a 1980 7060 and 1984 F3 hydro. |
Replies:
Posted By: MACK
Date Posted: 25 Nov 2016 at 7:30am
| Yes, that is right. Need some longer wires so they can be zip tied to brush holder. MACK |
Posted By: Ben (MI)
Date Posted: 25 Nov 2016 at 7:31am
|
Thanks Mack! There must have been a jumper in there that fell off. ------------- Part time farming with a 1980 7060 and 1984 F3 hydro. |