Allis G oil pump question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131769
Printed Date: 31 Oct 2025 at 2:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis G oil pump question
Posted By: Tinco2
Subject: Allis G oil pump question
Date Posted: 24 Nov 2016 at 11:21am
I am currently restoring An Allis G. I am in the process of replacing the oil pump and noticed that there are two types of gaskets. One has the cut out for the oil ports and the other has the gasket material around the oil ports. The tractor service manual shows the one with the gasket cut out around ports installed but the manual that come with the oil pump has the one with the gasket around the ports installed. help im confused 
|
Replies:
Posted By: K-Mo
Date Posted: 25 Nov 2016 at 7:06am
|
You should be able to download a service manual here. http://www.foleyengines.com/resources/product-guides-forms-tags/continental-l-head-overhaul-manual |
Posted By: Gerald J.
Date Posted: 25 Nov 2016 at 9:07am
|
I have an Allis G B C and CA shop manual on line at: http://www.geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf" rel="nofollow - http://www.geraldj.networkiowa.com/Trees/Allis-Chalmers-G-B-C-CA-Service.pdf It is an 11 mb download. I do have a Continental manual in paper in my library. I suspect the oil pump gaskets depend on the details of the buyer of the engine whether Massey Pony, Allis G or other uses. The blocks of the Pony and the Allis don't interchange. But most all the other parts do. The gasket may also depend on when the engine was made. Gerald J. |
Posted By: K-Mo
Date Posted: 25 Nov 2016 at 9:17am
|
Perhaps I don't understand your question. Page G-19 in your manual has a picture of the oil pump breakdown showing the gaskets. Beyond that, I can't help. New to the G myself. |
Posted By: JoeM(GA)
Date Posted: 25 Nov 2016 at 10:09am
|
both my Allis Manual and my Continental "N" manual show the same orientation #6 & #8 are your gaskets with #8 going against the block do you have something different? A picture of what you have might help us- http://s33.photobucket.com/user/Joecdeere/media/temp%20folder/zzzzzzzzscan0001_zpsinf4twln.jpg.html" rel="nofollow">  ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: K-Mo
Date Posted: 25 Nov 2016 at 10:37am
|
Anything I have shows the same sequence of parts. Gasket #8 against the block, Cover #7, Gasket #6 and and Body #14. |