Oil Pan Goodies
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131590
Printed Date: 31 Oct 2025 at 2:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Oil Pan Goodies
Posted By: James Coons
Subject: Oil Pan Goodies
Date Posted: 20 Nov 2016 at 12:40pm
Found these in the oil pan of a 190 gas. Any ideas on what they came off? |
Replies:
Posted By: injpumpEd
Date Posted: 20 Nov 2016 at 12:52pm
|
Does it still run? Or a non runner? ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: DrAllis
Date Posted: 20 Nov 2016 at 12:54pm
| Governor. |
Posted By: JoeO(CMO)
Date Posted: 20 Nov 2016 at 2:02pm
|
I'll go along with DrAllis! On a side note it looks like the contents of a tool box I emptied last week. ------------- |
Posted By: James Coons
Date Posted: 20 Nov 2016 at 3:02pm
| I haven't started it. It sat for several years before I got a hold of it and the owner wasn't sure of its history. I figured it was likely part of the governor. Is that clip one of the ones that holds the weight pin in place? |
Posted By: Tony.Or
Date Posted: 20 Nov 2016 at 3:08pm
|
------------- http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com |
Posted By: LeonR2013
Date Posted: 20 Nov 2016 at 6:40pm
| Juvenile T-Rex or what's left. |
Posted By: Bill_MN
Date Posted: 24 Nov 2016 at 8:43pm
|
c clip from governor weight pin definitely, rest looks like exploded weight pieces ------------- 1951 WD #78283, 1918 Case 28x50 Thresher #76738, Case Centennial B 2x16 Plow |