Brought home what was supposed to be a B
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=13082
Printed Date: 30 Dec 2025 at 3:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Brought home what was supposed to be a B
Posted By: Glockhead SWMI
Subject: Brought home what was supposed to be a B
Date Posted: 28 May 2010 at 2:15pm
|
Ended up being a C with a B wishbone axle. Not sure if I want this. I really need something narrower to cultivate with. Lots of good parts here though.
Going ot pick up one of the WD's Sunday. Going to look at an unstyled WC also. I'll post pics soon.
|
Replies:
Posted By: Dick L
Date Posted: 28 May 2010 at 2:28pm
| The old style B cultivators will work on the C the same as the B when you have the wider front. They bolt to the torqie tube over the inspection hole and on the foot rest. You can set the rims in close to the fenders and be quite narrow. You probly need to swap sides with the rims to keep the tread going forward. It would just be the looks because you won't need a lot of traction cultivating. |
Posted By: DREAM
Date Posted: 28 May 2010 at 5:01pm
| That should work just fine. Like DickL said, just take the left wheel assembly with hub off and swap to the right side and vice-versa. No need to break the concentrics loose or remove the rim from the center. I had to spread mine out to mount the 80 series cultivators with the rear middle plows. The rear lift arm lower support will not clear the wheels when turned in. I am set up for 36" rows, and like the room there. If space is a problem, the narrower rows (30"?) that you can get with the B will work fine. I just like the narrow front on the C better for cultivating. One less thing I have to worry about running over something with. |
Posted By: Glockhead SWMI
Date Posted: 28 May 2010 at 5:26pm
|
Here is a picture. I wonder what the frame that the home made blade is hanging off of was originally for? http://i218.photobucket.com/albums/cc308/jessz1/IMG_9445.jpg
|
Posted By: Glockhead SWMI
Date Posted: 29 May 2010 at 7:17am
| My picture is not working properly... |
Posted By: GlenninPA
Date Posted: 29 May 2010 at 8:10am
|
Posted By: Glockhead SWMI
Date Posted: 29 May 2010 at 8:22am
|
Thanks Glenn.
Every time I try and upload a photo, it says it is too big or the server is busy or??? I do not like the photo deal on this site.
|