Print Page | Close Window

190xt 3 Point hitch wont lower

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129852
Printed Date: 09 Jun 2025 at 3:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 190xt 3 Point hitch wont lower
Posted By: johnny
Subject: 190xt 3 Point hitch wont lower
Date Posted: 10 Oct 2016 at 10:46pm
i bought this 190xt back in january and i am trying to get ready for plowday. i put one of my semi-mounted plow on and i made a couple passes and all was fine. but then the 3 point started to raise the plow out of the ground. the 3 point will raise up but it will not lower back down unless i shut the tractor off.

Inam thinking the problem is in the traction buster but not sure what to look at?

Any ideas are appreciated.
johnny



Replies:
Posted By: wayneIA
Date Posted: 11 Oct 2016 at 12:42am
Linkage for the traction booster may be stiff and needs to be freed up.  It is connected to the rod that goes to the base pivot of the right draft arm (follow the rod up to the pivot above and check that it all moves freely).  Also make sure the handle for the traction booster on the rear of the console is pushed down as far as it will go, then after you see that it isn't raising the draft arms you can adjust as needed.


Posted By: johnny
Date Posted: 11 Oct 2016 at 2:39pm
linkages are free, should the traction buster valve be easy to slide freely? im thinking its stuck.

thanks
johnny


Posted By: johnny
Date Posted: 11 Oct 2016 at 9:16pm
the issue ended up being the traction booster valve was sticking. i got that freed up and its working properly now.

thanks
johnny



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net