Print Page | Close Window

Allis Snap Coupler Blade Help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129779
Printed Date: 14 Jun 2025 at 2:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis Snap Coupler Blade Help
Posted By: Steve-Ohio
Subject: Allis Snap Coupler Blade Help
Date Posted: 09 Oct 2016 at 9:19am
Bought a snap coupler blade without the lifting arms, (pic for example below) today.  Anyone have a parts blade or extra set theyd like to sell me? 



Thanks

Steve



Replies:
Posted By: sling-it
Date Posted: 09 Oct 2016 at 10:13am
With some measurements, those could be made by a blacksmith pretty easily.


Posted By: DiyDave
Date Posted: 09 Oct 2016 at 6:03pm
or one of the bigger plows, at a junkyard might be close...


Posted By: Orange Tractors
Date Posted: 10 Oct 2016 at 4:18am
Are you missing everything, or just the flat bits above the round bar?

I can get measurements from mine if that will help you.

Robert


Posted By: B W in Mo
Date Posted: 10 Oct 2016 at 6:24am
All he needs is the lift arm latches that go on the tractor.
B W


Posted By: truckerfarmer
Date Posted: 10 Oct 2016 at 8:29am
A piece of 5/8" rod welded to a 1 1/2" x 1/4" flat bar stock with a hole drilled in the end will do the job.

-------------
Looking at the past to see the future.
'53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer

Duct tape.... Can't fix stupidity. But will muffle the sound of it!


Posted By: jaybmiller
Date Posted: 10 Oct 2016 at 8:33am
hmm..always wondered which WAY those things are supposed to go on, as they are 'offset' front to back ????

Jay



-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water


Posted By: Fred in Pa
Date Posted: 10 Oct 2016 at 10:56am
I have these ends if they help .U can take them off the rods .

   







-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.


Posted By: Ted J
Date Posted: 10 Oct 2016 at 12:32pm
Jay, in Fred's second pic, you can see the hump at the left side of the pic.  This is the side that goes into the snap coupler arms. You can tell by the top pic from Steve, the hitch eye is pointing at us.


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net