D 15 II Battery Hold Down
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129551
Printed Date: 09 Jun 2025 at 4:09pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D 15 II Battery Hold Down
Posted By: Dave H
Subject: D 15 II Battery Hold Down
Date Posted: 03 Oct 2016 at 4:58pm
I am not much of a fabricator, but have not been able to locate the top hold down for the battery.
Prob is that the threaded hold down bolts are on the corners. i am looking at getting one for another tractor and cut and paste the eyelets to fit.
Anyone know of a source for the AC ones?
|
Replies:
Posted By: allisorange
Date Posted: 03 Oct 2016 at 5:38pm
Call Scott at 320 838 3481 in Minnesota. He will have anything you need.
John Carlson
|
Posted By: shameless (ne)
Date Posted: 03 Oct 2016 at 11:51pm
Posted By: Dan73
Date Posted: 04 Oct 2016 at 12:43am
Ratchet straps they are the modern duck tape.
|
Posted By: Dan73
Date Posted: 04 Oct 2016 at 12:44am
Or you can go old school baler twine. Must be more then one battery held down with baler twine.
|
Posted By: Dave H
Date Posted: 04 Oct 2016 at 7:32am
think I would prefer a bungee cord. 
I am gonna give the recommended guy a try and then go to fabricating if necessary
Also I was thinking maybe I could slip a flat rock outta the crick on top of it. 
|
Posted By: Dan73
Date Posted: 04 Oct 2016 at 7:51am
Dave H wrote:
think I would prefer a bungee cord. 
I am gonna give the recommended guy a try and then go to fabricating if necessary
Also I was thinking maybe I could slip a flat rock outta the crick on top of it. 
| Those bungee cords only last a little less then a year holding your battery in place then they break in the middle and you think it is still hooked as both ends are still in place. In a d17 that can result in your battery bouncing into the center hood support and making a scare the crap out of you light show in the middle of the field. I might have made that mistake before....
|
Posted By: Dave H
Date Posted: 04 Oct 2016 at 12:26pm
allisorange
I appreciate the tip. Scott did not have any but he gave me the name of the guy, Mat that makes them.
He is gonna fab me one up with the J bolts later on, a he describes it ,when the snow flies and he is in the shop. 
|
Posted By: JOHN N/IL
Date Posted: 04 Oct 2016 at 8:16pm
for the heck of it try agco,i bought mine in 2007 from there with the hold down hooks
------------- D-15IIG65,D-17IVG67,D-17D58,620
|
Posted By: Dave H
Date Posted: 05 Oct 2016 at 7:50am
John, Brenda at Sandy Lake said they are NLA.
|
|