Farm Equipment - 3pt hitch

Print Page | Close Window

3pt hitch

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129179
Printed Date: 17 Jun 2025 at 1:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 3pt hitch

Posted By: Tilbury
Subject: 3pt hitch
Date Posted: 24 Sep 2016 at 6:18pm

My 3pt hitch on d19 will not hold in position. It goes up and down fine but when you try to hold it in position it slowly creeps up to top and holds there

Replies:

Posted By: shameless (ne)
Date Posted: 24 Sep 2016 at 8:36pm

check your draft control lever

Posted By: Tilbury
Date Posted: 24 Sep 2016 at 8:42pm

Ok will do thanks

Posted By: Tilbury
Date Posted: 26 Sep 2016 at 10:40am

This tractor has 4 position control for 3 pt hitch. Up, down, hold position and traction boost. In hold position or traction boost position it slowly creeps up to top of 3 pt hitch position with nothing connected to 3 pt hitch

Posted By: KY
Date Posted: 26 Sep 2016 at 3:18pm

We had the same problem. There was a messed up ball and spring in the valve block that the levers are on.

Posted By: Tilbury
Date Posted: 26 Sep 2016 at 5:09pm

I had the valve block off did not see anything wrong do you remember if it was the poppet valve or what u did to repair it