Farm Equipment - Distributer Conversion, kit Per Trtronix ???

Print Page | Close Window

Distributer Conversion, kit Per Trtronix ???

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=129137
Printed Date: 22 Dec 2025 at 1:33pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Distributer Conversion, kit Per Trtronix ???

Posted By: Macon Rounds
Subject: Distributer Conversion, kit Per Trtronix ???
Date Posted: 23 Sep 2016 at 5:51pm

Anyone know the part number for PerTronix Conversion kit for 4cyl. Ford 2000 tractor ? This tractor has been converted to 12 volt, negative ground. Using alternator.

Ready for ignition upgrade.

Thanks in advance

-------------
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate

Replies:

Posted By: DiyDave
Date Posted: 23 Sep 2016 at 6:09pm

most places that sell pertronix will have a list of the kit you need. You will need to know if it is + or - ground, and a 3 ohm resistance coil, I believe. Cheapest place I have found is the Brillman Co, virginia...

Posted By: Dan73
Date Posted: 23 Sep 2016 at 6:51pm

Steve at B & B custom circuits can set you right up. Or get the part number off the distributor and search for a kit to match that distributor. It should be a 12 volt negative ground tractor and you should have a 3 ohm coil without a resistor. The older ford 800 serries was 12 volt negative ground with a 3 ohm coil so I am pretty sure the 2000 is as well.

Posted By: Macon Rounds
Date Posted: 23 Sep 2016 at 7:45pm

Thanks for the replys !!!!!

-------------
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate