Old Tractor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128532
Printed Date: 31 Oct 2025 at 11:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Old Tractor
Posted By: gorillamansteve
Subject: Old Tractor
Date Posted: 09 Sep 2016 at 9:41am
I know I might be asking a lot but I have no idea about this Tractor, I need to sell it and don't know anything about it. If anyone can tell anything about it from the pics I would very much appreciate it.    |
Replies:
Posted By: CAL(KS)
Date Posted: 09 Sep 2016 at 9:47am
|
Model B. serial # is located on top of transmission just forward of shifter ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: GreenOrange
Date Posted: 09 Sep 2016 at 9:47am
| You've got a model B there. If you look by the gear shifter, it will say tractor number in raised letters. Right next to that is a flat pad. I'm at flat pad you should see numbers stamped in - that will be the tractor's serial number and can be used to determine year. Yours is probably somewhere in the mid to late 1940's. |
Posted By: TimNearFortWorth
Date Posted: 09 Sep 2016 at 9:58am
| I like that clutch pedal lock, not a B expert but never noticed that before . . . . |
Posted By: BigMo(TX)
Date Posted: 09 Sep 2016 at 9:59am
| It is missing the air breather that should come up through the hood. The rear wheel weight is nice and the sheet metal looks pretty straight. It looks as though it's been sitting for a while, hopefully with the rain cap on the muffler the motor isn't locked up. |
Posted By: rpropst
Date Posted: 09 Sep 2016 at 10:06am
|
1 1\8 inch PTO and no holes in torque tube for cultivator brackets
Pre 1950. All of my B tractors have clutch latch.
------------- 1950 snap coupler B 1948 WD 1951Ca 1952B 1952adjustable axel B |
Posted By: Brian G. NY
Date Posted: 09 Sep 2016 at 12:18pm
| From what can be seen, the sheet metal looks quite nice; especially the grill and its shell! |
Posted By: Dave/cvny
Date Posted: 09 Sep 2016 at 12:33pm
| So if you want to sell it , how much do you want for it? |
Posted By: CrestonM
Date Posted: 09 Sep 2016 at 12:49pm
| If that tail light had the glass in it, it would be worth some money. |
Posted By: Mikez
Date Posted: 09 Sep 2016 at 6:41pm
| Was thinking the same thing. Tin is pritty straight. Looks like the air intake is under tractor in basket |
Posted By: DonBC
Date Posted: 09 Sep 2016 at 7:06pm
|
Looks as if there is a light dozer blade mounted on it as well. ------------- Jack of all trades, master of none |
Posted By: Pat the Plumber CIL
Date Posted: 09 Sep 2016 at 7:33pm
|
Question; was the clutch latch for hand cranking? ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |
Posted By: DiyDave
Date Posted: 09 Sep 2016 at 7:37pm
YEP
|
Pat the Plumber CIL wrote:Posted By: TramwayGuy
Date Posted: 09 Sep 2016 at 7:38pm
| Nice tires! Original maybe? |
Posted By: Wdtractorman
Date Posted: 09 Sep 2016 at 8:14pm
| Its got shutters on the radiator too |
Posted By: Bill Long
Date Posted: 09 Sep 2016 at 10:12pm
|
My Favorite with what appears to be a Myers Snow Plow mounted on it. For sitting looks to be in very good shape. Goes to show what my father used to say "they are made to sit outside. Don't baby them" I hope someone gets it and restores it. If the motor is not stuck looks like an easy restore. And if it is stuck may not be all that difficult to rebuild. Just too good a looking machine for scrap. Advertise it and you should get something for it. Just don't let it go for scrap. Let us know what you do. Good Luck! Bill Long |
Posted By: CrestonM
Date Posted: 09 Sep 2016 at 10:19pm
| I might have to build myself a snow plow like that! |
Posted By: shameless (ne)
Date Posted: 10 Sep 2016 at 12:47am
| pull it outta the weeds, and clean it off. you'll get better bites and price on it |
Posted By: Lonn
Date Posted: 10 Sep 2016 at 5:51am
|
It looks straight and fairly complete but in today's market I doubt it would grab $500 ................. if you are looking to price it. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |