7580 Cab
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128473
Printed Date: 23 Dec 2025 at 12:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7580 Cab
Posted By: Acfarm
Subject: 7580 Cab
Date Posted: 07 Sep 2016 at 11:07pm
|
Can a 7580 cab bolt onto a model 7000 tractor? Reason for asking is have a parts 7580 out back and a 7000 in need of a cab...... Thanks! ~Warren
|
Replies:
Posted By: shameless (ne)
Date Posted: 08 Sep 2016 at 12:47am
| I think the only difference is the door opening different...are the controls the same inside the cab? |
Posted By: grinder220
Date Posted: 08 Sep 2016 at 6:48am
| 7580 has a larger door that opens opposite direction, dont think it will clear the tire and it has no fender wells. |
Posted By: Acfarm
Date Posted: 08 Sep 2016 at 9:47pm
I was planning on swapping the controls out since the levers are different.
Fender wells are not a big deal.... I will check the door clearance. Thanks! ~Warren
|
shameless (ne) wrote:Posted By: GM Guy
Date Posted: 12 Sep 2016 at 2:14am
|
It would look pretty cobbled. the 4wd cabs were based off the 2wd cabs, but they are quite different.
------------- Gleaner: the properly engineered and built combine. If you need parts for your Gleaner, we are parting out A's through L2's, so we may be able to help. |