G Mower Sickle Blade, Need Info
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=128434
Printed Date: 10 Jun 2025 at 1:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: G Mower Sickle Blade, Need Info
Posted By: WCarp
Subject: G Mower Sickle Blade, Need Info
Date Posted: 07 Sep 2016 at 12:31am
|
I have what I believe is an AC G mower sickle blade that's been setting around for awhile that I would like to sell and was wondering if there are any experts out there that could confirm whether it is a G sickle mower blade or not? I downloaded photos of it. Some measurements are: Ball measures 1 3/8" across, on hole to hole to side. Ball has 1/4" hole through it. Plate, ball is on measures 3 13/16" wide. Length 5' 4". Has 20 3" sections. Has 315540 on knifehead on top, 6" from ball. Thanks.  
|
Replies:
Posted By: Bill Long
Date Posted: 07 Sep 2016 at 7:18am
|
If I recall all sickle blades were the same for all Allis Chalmers ball type blades. If the size - 5' 6' 7' - was the same they were interchangeable. Course the G only had a 5' blade. Good Luck! Bill Long
|
Posted By: WCarp
Date Posted: 30 Sep 2016 at 2:19pm
|
I called a tractor dealer and found indeed that it is a model G sickle blade. If a person puts a 70 in front of the number (which is common for the older parts) on the sickle head, the number is found. So now I will try to sell it. |