5015
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=124778
Printed Date: 29 Aug 2025 at 12:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 5015
Posted By: AllisandGleaner
Subject: 5015
Date Posted: 19 Jun 2016 at 4:34pm
| Looking to buy a 5015 with a belly mower and I wanted to know the transmission gear speeds anyone know what the speeds are thanks. |
Replies:
Posted By: irlbeck A-C'S
Date Posted: 19 Jun 2016 at 5:38pm
 It can go slow, real slow, and really really slow.LoL Tires can adjust the speeds a little. It appears top speed is 7.7 mph and goes down to a snails pace. ------------- B,C,CA,(2)WC's,(4)WD's,(2) WD45'S, 45Diesel, (2)D12'S Series 2, D12 Hiclear,(2)D12 Series 3, HD3, D17NF (3)D17 Series 4 Diesels, M-100 Grader,8550,A few Lawn tractors lots of other AC stuff |
Posted By: Gary Burnett
Date Posted: 19 Jun 2016 at 8:19pm
|
They can go very slow,I have a MF 220 which is about the same as the AC 5030 and don't use the lowest range even when I run the rototiller with it.Handy tractors down side is there is No parts support. |
Posted By: AllisandGleaner
Date Posted: 19 Jun 2016 at 8:41pm
| Thanks looks like 2nd in high is the mowing speed |
Posted By: GARY(OH/IN)
Date Posted: 21 Jun 2016 at 10:55pm
|
Yes 2nd in high at about 2500 RPM is what I run 2 different 4' bush hogs and a 5' finish mower if your grass isn't too heavy. I have a manual for the 1582 3 blade 54" belly mower. Some mouse damage on front lower left cover, doesn't effect info. $5+ $2 postage. |
Posted By: timac5015
Date Posted: 09 Jul 2018 at 9:50pm
|
why wont my 5015 start right up with new battery still needs a jump I think the ccamps is 585 but I hit the glow plugs 5-7 seconds then nothing not even a click charged by truck it will eventually start right up and sound like a Porsche functions great when running I use it in the snow with 6 ft blade and cylinder lift but I got to be able to depend on it how long should block heater be on before planned use? great forum any advice thanx guys |
Posted By: timac5015
Date Posted: 09 Jul 2018 at 9:51pm
AM I NOT GIVING THE PLUGS ENOUGH TIME TO HEAT? 
|
Posted By: DiyDave
Date Posted: 10 Jul 2018 at 4:38am
| If it is like most Japanese tractors of that era, I think the pre-heat time is 30-45 seconds. Also check the buss bar, that connects the gp's together. it sometimes gets loose, on the gp's, and doesn't connect... |