manure spreader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120478
Printed Date: 18 Jul 2025 at 4:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: manure spreader
Posted By: JXMARCO
Subject: manure spreader
Date Posted: 16 Mar 2016 at 9:59am
|
I have a ground driven manure spreader with the year 1939 on the frame I don't know the model number but it looks very muck like a New Idea 12 I am looking for parts and have had no luck I don't think many of these were made any help would be greatly appreciated 
|
Replies:
Posted By: Mikez
Date Posted: 17 Mar 2016 at 11:03pm
| What do you need |
Posted By: JXMARCO
Date Posted: 18 Mar 2016 at 10:26am
|
I need this hub and one cog and spring 
|
Posted By: Johnwilson_osf
Date Posted: 18 Mar 2016 at 10:45am
|
Do you have part numbers? I have some NI spreader parts, but I have them by number John ------------- Allis Express: Eastern PA on Rt 80 8050, 8010, 6080, 190, D14, DA 6035, AA 6690, 5650, Gleaner F2 |
Posted By: JXMARCO
Date Posted: 18 Mar 2016 at 10:53am
| I have no part numbers and I don't even now the model of this spreader but it looks a lot like the NI-12 |
Posted By: Farmuse01
Date Posted: 18 Mar 2016 at 11:26am
|
I am not real sure, but...I have a 12A New Idea and the front head board is wooden. My dad has both 17NI, and a 206NI and they both have a steel front head boards. Also the upper side rails on those(17, 206) are steel like the one you have. The 12A has more wooded rails with a small piece of angle iron on them. Sorry I don't have any parts but maybe this info will help you. Jonathan |
Posted By: Mikez
Date Posted: 18 Mar 2016 at 8:05pm
| Ok will see if have parts book then see if I can find part number |
Posted By: Bull
Date Posted: 19 Mar 2016 at 8:38am
|
I believe that spreader is an AC 95 G. I have one restored. I have a parts book, I will look up the hub. I think they made 2000 of them. ------------- WD45 Diesel, RC,CA,IB, B, G, 616, Early B-10, D-10, Terra Tiger, 95G spreader, SC blade |
Posted By: JXMARCO
Date Posted: 19 Mar 2016 at 3:25pm
| ok hank you also the cog |
Posted By: dawntreader74
Date Posted: 19 Mar 2016 at 4:36pm
| do you have the part that broke off' it would weld together nice' an still could be used. |
Posted By: Bull
Date Posted: 20 Mar 2016 at 1:43pm
|
The hub is 533886 either side, the pawl is 533831 for the right side and 533832 for the left. Springs are 533922 right and 533923 left. I bought springs at the hardware store and bent the ears to fit. ------------- WD45 Diesel, RC,CA,IB, B, G, 616, Early B-10, D-10, Terra Tiger, 95G spreader, SC blade |
Posted By: JXMARCO
Date Posted: 21 Mar 2016 at 4:27pm
|
the pawl is 533831 this is an allis chalmers part number |
Posted By: Mikez
Date Posted: 21 Mar 2016 at 11:59pm
| I found the new idea parts book, do you want those part numbers. What side is it |
Posted By: JXMARCO
Date Posted: 22 Mar 2016 at 12:29pm
| Its the right side |
Posted By: Mikez
Date Posted: 22 Mar 2016 at 5:34pm
| I might have a pawl in new idea |