Construction and other equipment

Print Page | Close Window

HD6G Final Parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=120147
Printed Date: 27 Jul 2025 at 6:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD6G Final Parts

Posted By: Hogman
Subject: HD6G Final Parts
Date Posted: 09 Mar 2016 at 8:13pm

Hello all, Ive been tearing into the finals on my 6G due to a bearing failure on the intermediate shaft and have finally gotten to the blood and guts of it. When the bearing failed it broke the intermediate shaft and chipped the edges of some of the pinion gear teeth that is on the intermediate shaft. If I have to I can probably clean the chipped teeth up and re-use the gear as 90% of the teeth surfaces are still intact and look to be not cracked or broken at the bottom. If I can find a replacement for a decent price I'll go ahead and replace it. The shaft on the other hand is a no go and will have to be replaced. My question is, who do you all recommend for replacement parts. I've looked around the net but haven't been able to come up with much. I was hoping to find a scrap yard that offered parts for the Allis heavy equipment but have been unsuccessful. The old thing runs good and everything else works so I hate to quit on it. Thanks for anything info you have to offer and happy digging.

Replies:

Posted By: wayneIA
Date Posted: 09 Mar 2016 at 8:37pm

I've gotten parts for my HD5 from Thill Track and Tractor in Wisconsin, and Draper Tractor Parts in Washington state.

Posted By: gemdozer
Date Posted: 10 Mar 2016 at 5:37am

I have the HD6 final drive parts ,pinion,intermediaire shaft, top shaft,gears etc.

Posted By: Hogman
Date Posted: 10 Mar 2016 at 8:37pm

Thanks for the replies. Gemdozer, I'm not really sure how to send a private message on here but I am interested in the shaft and the gear at the least. What would be the best way for me to get in touch with you on a price? If it helps you can send me an e-mail at thewaidfamily@outlook.com

I look forward to hearing back from you and thanks again to everyone.