190xt slipping
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=113531
Printed Date: 05 May 2025 at 9:49am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190xt slipping
Posted By: ironac
Subject: 190xt slipping
Date Posted: 19 Oct 2015 at 9:59pm
|
Have a 190xt series 3 diesel. Been pulling loads of corn into town and I noticed sometimes after coming to a stop, I let out the clutch and the transmission seems to slip then it will come out of it right away. Also if I'm in the field and i have my front wheels cranked all the way to one side in road gear with the clutch out it won't move until I straighten them out. Any ideas?
|
Replies:
Posted By: DSeries4
Date Posted: 19 Oct 2015 at 10:03pm
You need a new clutch.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: nickia
Date Posted: 19 Oct 2015 at 10:08pm
|
i had the same problem with my 200 turn the corner and it would stop and then jump and take off i was told low hydrolic oil or some crap in my flow divider valve?
|
Posted By: SteveM C/IL
Date Posted: 19 Oct 2015 at 10:08pm
|
Or your PD is slipping...which could be nothing more than worn linkage which works the valve
|
Posted By: MACK
Date Posted: 19 Oct 2015 at 10:39pm
|
I would say flow divider in pump needs cleaned and polish the spool. Linkage for PD has worn places. Bearings on linkage, bushing in torque tube that linkage cross shaft pivots in, cross shaft, linkage link to valve, and pins in that link. MACK
|
Posted By: ironac
Date Posted: 20 Oct 2015 at 2:26pm
|
Well it was just in the dealer to get the pto fixed and the guy who worked on it said he found some bearing pieces when he drained the oil. He didn't have a clue where they came from.
|
|