Changing the fan belt on a 175D
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=111245
Printed Date: 14 Sep 2025 at 7:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Changing the fan belt on a 175D
Posted By: old AC friend
Subject: Changing the fan belt on a 175D
Date Posted: 30 Aug 2015 at 9:10pm
| Have never done it before. If I remove those 4 bolts from in front of the crankshaft pulley that holds the drive shaft that runs the hydraulic pump, will that connector slide forward enough to put the fan belt on? |
Replies:
Posted By: Tracy Martin TN
Date Posted: 30 Aug 2015 at 9:39pm
|
Yes it will. Hope your splines are still good. They wear pretty well. The little snap ring might have to move if it is real close. Depends on how far shaft is in front coupling.Grease the chain while you are there. HTH Tracy ------------- No greater gift than healthy grandkids! |
Posted By: old AC friend
Date Posted: 09 Sep 2015 at 2:25pm
| Thank you for help, Tracy. I don't know what the splines are but I would guess they are the bushings around the bolts and they have been gnawed on pretty good. AGCO tells me they are no longer available. Do you have any ideas where I can get replacement parts? |
Posted By: Tracy Martin TN
Date Posted: 09 Sep 2015 at 2:30pm
|
The splines are inside the hub, and on outside of shaft. They are what drives the pump from crank pulley once you install the snubbers(worn pieces you refer to) . You should be able to get them from a John Deere dealer, I think they are what was used on a 3010 pump also. The id will need to be enlarged some.A good counter man will know what they are if you take one in. HTH Tracy ------------- No greater gift than healthy grandkids! |
Posted By: farmtoybuilder
Date Posted: 09 Sep 2015 at 3:53pm
|
Or you can do this!!!!!!!!!Put a link belt on it! Fast and easy!!!! We have ran this style belt on our forklift with pump drive for years & Thousands of hours and its still good as new. Most Industrial places carries it. Here's link to one of the manufacturers. http://www.fennerdrives.com/nutlink/_/NuTLink-B/17/5L/ http://www.bdhbelt.com/link-v-belts.asp ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: farmtoybuilder
Date Posted: 09 Sep 2015 at 3:59pm
 ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |