1961 d10 pilot bushing
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=110253
Printed Date: 14 Sep 2025 at 12:06pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1961 d10 pilot bushing
Posted By: billyrobert
Subject: 1961 d10 pilot bushing
Date Posted: 11 Aug 2015 at 1:25pm
|
need some help what are the step i need to follow to change the pilot bushing on a 1961 d10 allis chalmers and where can i find one . thanks
|
Replies:
Posted By: MrHDC
Date Posted: 11 Aug 2015 at 1:58pm
First thing I'd recommend is getting a shop manual for your tractor if you don't have one. As far as the part goes you can go to the AGCO Parts website as a guest and pull up the D10 parts manual. The clutch shaft bushing is in the flywheel group. Try a local AGCO dealer with the part number. If no luck give Schmitt & Sons in Mt Hope, Kansas a call. (800-281-2164)They've been real helpful. A lot of folks go to an Oilite bushing. It will last a very long time. You'd have to measure ID/OD/length to get one that will work and find a supplier on the web. You can also call Brenda at Sandy Lake Implement. She's great to work with and can find most any part you need.
Hervey
|
Posted By: CTuckerNWIL
Date Posted: 11 Aug 2015 at 5:17pm
| 70228188 | 1 | BUSHING, clutch shaft (Prior to Tr. S/N D10-3501 & D12-3001) |
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: CTuckerNWIL
Date Posted: 11 Aug 2015 at 5:19pm
I would think if the bushing is bad, it's probably time to change the clutch, pressure plate and throw out bearing too. You're gonna have to split the tractor in half to do any of it.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: norm[ind]
Date Posted: 11 Aug 2015 at 8:03pm
|
bought mine at the dealer not expensive
|
|