344 buda engine toruques
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=101907
Printed Date: 19 Jul 2025 at 8:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 344 buda engine toruques
Posted By: kinghunter
Subject: 344 buda engine toruques
Date Posted: 13 Feb 2015 at 8:22pm
|
could i get the torque specs on the 344 buda in a hd 6. head torques rod bearing torques and valve lash specs for intake and exhaust. and i'm sure i'm missing something. and i sure want to think everyone on my previous post you all don't know how much help you are to a young guy like me thats trying to carry on a tradition of running all allis chalmers on my farm. |
Replies:
Posted By: JC-WI
Date Posted: 13 Feb 2015 at 10:08pm
 Fire order 1342 warmed up (160-185) valve lash Intake .016" and Exhaust .020" . After that, they may be set cold at Intake .018" and Exhaust .022" Mains; Front, Intermediate and Rear main caps 3/4" nuts 210-230 lbs. ft. Middle main cap, 5/8" nuts, 160-170 lbs. ft. Rod cap nuts, 120-130 lbs. ft. Cylinder sleeve flange standout .006" to .009" abovethe flat of surface of block.. and must not be more than.002" between adjacent cylinders. ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: kinghunter
Date Posted: 14 Feb 2015 at 8:20am
| that explains it all thanks alot. |
Posted By: JC-WI
Date Posted: 14 Feb 2015 at 11:44am
A picture is sometimes worth a thousand words...  ------------- He who says there is no evil has already deceived himself The truth is the truth, sugar coated or not. Trawler II says, "Remember that." |
Posted By: DMiller
Date Posted: 14 Feb 2015 at 6:24pm
| It doesn't seem to be in the manual I have but a good caution on stud mounted anything. From Detroit Diesel and Mack Truck were notes in their manuals to verify the studs at bottom of threaded bores prior to tightening head retainer nuts. |
Posted By: kinghunter
Date Posted: 14 Feb 2015 at 8:12pm
|
thanks again everyone!!!! Kent Fletcher Farms Fletcher logging |