Farm Equipment - finally made it back to the engine room

Print Page | Close Window

finally made it back to the engine room

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=10154
Printed Date: 22 Aug 2025 at 11:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: finally made it back to the engine room

Posted By: mlpankey
Subject: finally made it back to the engine room
Date Posted: 27 Mar 2010 at 6:24pm

Wrestling finished last saturday . Matt finished fifth in the state 148lbs Clay finished 6th in state in the hvweights. So I finaly got to fit Murphys rocker arms up today . four hours later rocker arm geometry is the best I can get it. rockers wheel center from front to back . I actually have 530 lift at the valve. Thats just .020 under what it mathematicaly works out but its close enough for tractor work. Rocker arms are to big to get a dial indicator on the valve retainer for a more precise measurement.

Pulling is getting real close here april 17 . I am getting anxious wanting to smell smoke.

-------------
people if they don't already know it you can't tell them. quote yogi berra

Replies:

Posted By: Allis Fields
Date Posted: 27 Mar 2010 at 6:28pm

Post som pics I'd love to see your assembly. Good luck at the pullin' season.

Posted By: Gary in da UP
Date Posted: 27 Mar 2010 at 6:39pm

Yea, Let the smoke out of it!