G Crankshaft Help!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=100924
Printed Date: 10 Sep 2025 at 6:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: G Crankshaft Help!
Posted By: JBuchan
Subject: G Crankshaft Help!
Date Posted: 24 Jan 2015 at 4:14pm
|
I'm trying to locate a crankshaft for a G with the continental N62 engine. Does anyone have one they would sell or know of anyone that has one available? The one I have is beyond repair. Thanks
|
Replies:
Posted By: CTuckerNWIL
Date Posted: 24 Jan 2015 at 5:46pm
Seems just a few years back , you could buy a new crank. I can't find one doing a google search though. The right shop should be able to weld up , straighten and grind a crank as a last resort.
-------------
http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com
Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF
|
Posted By: JoeM(GA)
Date Posted: 24 Jan 2015 at 5:57pm
I know Tony C has them on his website
-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB
|
Posted By: wbecker
Date Posted: 24 Jan 2015 at 6:23pm
Could try an add in the classified section of this site.
Could try calling Montes Equipment 312-225-2660 they are N62 parts experts.
Could watch ebay if your not in a hurry, I see them sometimes on there.
Could buy a new one from one of the sponsors.
-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152
|
Posted By: wbecker
Date Posted: 24 Jan 2015 at 6:29pm
-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152
|
Posted By: WD45Diesel57
Date Posted: 24 Jan 2015 at 9:56pm
I have an extra crank it's alittle heavier and has a centre balance weight but came out of an N62, I'd part with it if you want it.
-------------
1-B's, 2-C, 2-CA's,2-WF, 1-WC,1-G, 3-WD's, 2-WD45, 1-RC, 1-D17 Diesel, 1-D14, 2-D15,1-D17 row crop,1-D19 gas and All Crop 40,60,66,72,90 and 100
|
Posted By: Gerald J.
Date Posted: 24 Jan 2015 at 10:04pm
http://www.valu-bilt.com/product_info.php?product_id=23878&item_number=R%201198456
Be sitting firmly before you look at the price.
Gerald J.
|
Posted By: Steve in NJ
Date Posted: 25 Jan 2015 at 8:48am
Give Tony C a call. He has em'....
Steve@B&B
-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife
|
Posted By: JBuchan
Date Posted: 26 Jan 2015 at 6:44am
|
Thanks for the replies. Tony C is the one that recommended posting here to find one. We've already contacted him and he doesn't have any available. Would the N62 engine from a forklift be the same?
|
Posted By: playsindirt
Date Posted: 26 Jan 2015 at 7:30am
Roeters in Grant Michigan have alot of Gs and parts. They will fix you up. Phone number is (231)834-7888. They also have a web site.
-------------
48G 49B 67D15 35picker allcrop60 1973 rotobaler 49C
|
Posted By: wbecker
Date Posted: 29 Jan 2015 at 12:36pm
If you are still looking for a G crank, I just saw one on this site, classified section.
Bill B
-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152
|
Posted By: Gerald J.
Date Posted: 29 Jan 2015 at 8:21pm
N62 were used in MH Pony and G and likely several other applications. I think all the parts but the blocks interchange. The Pony and the G starters are in different locations and mounted on the block so those blocks don't interchange. It would take looking at a complete Continental N62 parts book to be sure. There might be one at www.henselfamilyfarms.com/links/ in the large collection of G manuals. My N62 manual from Continental doesn't mention the known variations.
Gerald J.
|
|