Allis Image Archive

This site is not affiliated with AGCO Inc., Duluth GA. or Allis-Chalmers Co., Milwaukee, WI. All trademarks remain the property of their respective owners. All information presented herein should be considered the result of an unmoderated public forum with no responsibility for its accuracy or usability assumed by the sponsors of this site or any corporate entity.
Unofficial Allis	Unofficial Allis Store	Parts and Services	Owner Registry
Discussion Page	Employee/Dealer Registry	Advertising Archive	Screen Saver, Wallpaper
Chat Room	Antique Tractor Shows	Serial Number Reference	Image Archive

Allis Image Archive

New Images from our guests
.

- EMC WD45 Experimental WD45 from Norm's sale - from Burt 0I3504

- My once upon a time pal - from JC(WI) 148085

- And The Last Pic...Sorry Guys!!...I Got Carried Away! - from Rick Corder 126200

- Still More Pics - from Rick Corder 126200

- And More Pics - from Rick Corder 126200

- More Pics - from Rick Corder 126200

- Part Of My Tractor Collection - from Rick Corder 126200

- WD-45 For sale - from Albert 104944

- G Testing post - from Robert Mull 085053

- WF One down and only ???? to go. - from Brian - KS 061820

- 77M rake Just restored - from Chad(NEWI) 0I3504

- D21 Is this good or what? - from GeorgeWJarvis 746003179

- D17 III D17 Series III original paint - from Craig 126125

- freeman Pictures of freeman loader for sale - from Randy Varilek 096947

- 4w-305 spring tillage in Thorp Wi. - from allisfarmer2 119794

- 8010 planting beans in Wi. - from allifarmer2 119794

- - from 0I3504

- wd finally finished my first restoration, tractor has been completely stripped and rebuilt - from Michael Fischer 110472

- D-14 unusual front end - from charlie 125805

- "B" rim wear on final drive - from Steve C(Ont) 123254

- 545d save from the iron man - from dnoym 124727

- 72 6 foot Brush Cutter - from Wally 109634

- IB Just completed restoration (IB) - from Mike Lynn/Paducah, KY 122248

- WD/WD-45 self contained engine puller - from "Burgie" 047536

- D14 I purchased this tractor last year and am slowly getting started on restoring it. - from Eric NY 0I3504

- G home made cultivator - from Eldon (WA) 106593

- 3 point hitch adaptor - from Rick Gove 0I3504

- With the grass down - from Tom MN 0I3504

- 185 1974 with turbo charger and air to air intercooler with 2500 hours - from Lester 119380

- 175 1975 with 1700 hours and turbo charger - from Lester 119380

- A One of the 3 remaining model A's in NZ. Belongs to Spark Bros, Rangiora. - from Orange Kiwi 043952

- New Zealand's AC authority John Spark, pictured with Nan Jones in March 2001 - from Orange Kiwi 043952

- k 1973 K - from Al berning 118039

- WD Engine picture - from Drew 149811863

- WD Rear View of my WD - from Drew 149811863

- 210 FOR SALE N. Indiana many new parts $8500 bfultz@burnsindustrial.com - from Brian Fultz 068809

- 170&90 My Father, Vernon Bailey--mid 80s - from demvy -in 093680

- - from 085410

- Signs my buddy and i got - from Richard 0I3504

- AC IB "Doc Hanna" with his IB moving one of the pullers in to the show area. - from Eric Ny 0I3504

- This is an arial view take during Sedam's Weekend of Wheels tractor show last July. - from Eric NY 0I3504

- GR AC GR BROCHURE - from PETER DOLMAN 0I3504

- GR FIRST DRIVING LESSON - from PETER DOLMAN 0I3504

- GR - from PETER DOLMAN 0I3504

- WC this is a shot of my buddies wc puller Barrie Hawk pulling the front wheel with a stock wc - from Joe Skinner 0I3504

- 1946 WC some pulling pics of the pumpkin( before the flaming part) - from Joe Skinner 0I3504

- 116 One row cotton picker in Georgia - from mike 0I3504

- Allis Tug Allis tug data plate - from Bret Ledford (OH) 0I3504

- Allis Tug Almost out of the Shop - from Bret Ledford (OH) 0I3504

- Allis Tug Just out of the shop - from Bret Ledford (OH) 0I3504

- D15 Straight from the field - from Jim Rose (NC) 0I3504

- D17 Another view - from RoyM 0I3504

- D17 Just got this finished- No decals yet - from RoyM 0I3504

- been hidden a long time - from nick 0I3504

- leaned up against the tree in 1985 - from nick 0I3504

- bringing home our two new original dealer signs - from nick 0I3504

- WD-45 After a hard days work - from Ben NW-OH 099505

- WC's Making Ceader shingles with a couple of WC's - from Gary.TX 0I3504

- 20-35 Not orange, but still good ole A-C - from Gary.Tx 0I3504

- 8-17 Not orange, but still A-C - from Gary.Tx 0I3504

- WD 45 Ready to take it home - from Roger Ohio 064494

- pump Allis Chalmers pumps for sale - from cdmn 0I3504

- D17 Friend of mine found this, it has a MF front end loader and a Davis backhoe - from David H. 101646

- H3 Its a cherry little thing!! Runs like a clock. - from David H. 101646

- wd My son reserected this one last year, we found it in a neighbors yard, it was really cheap and all it neded was a valve job!! - from David H. 101646

- What model - from Mike(MN) 0I3504

- AC my lineup - from Don 035131

- 1939WC - from Old Red 108046

- 190-200 Here's another part we are makeing - from denny 107822

- 190XT Jacks 190XT ready for its new home - from denny for Jack 107822

- 7060 Mark from Wi. 7060 waiting for its new home..leaving today - from denny for steele 107822

- D15 D15 - Remote Hydraulic Outlets - from Jim Rose (NC) 095735

- 8070 dean from gerard il.8070 waiting for its new home - from denny for ddil 107822

- B B with 5 foot Woods mower --FOR SALE - from George Schulz 085133

- - from 085410

- UC - from Farrell (Utah) 100889

- UC Dynamic Duo - from Farrell (Utah) 100889

- UC UC - from Farrell (Utah) 100889

- 7080 My NIB 1978 ERTL Allis Chalmers 7080. - from Shaza-Hauler 098327

- 7080 The Box for my NIB 1978 ERTL AC 7080 - from Shaza-Hauler 098327

- D17/80S - from Kevin in NE 0I3504

- D12 D12 hicrop - from Okie 109839

- D-19 The 1989 D19 Toy Farmer that Gene picked up for me. - from Shaza-Hauler 098327

- D12 D12 Hicrop - from Okie 109839

- D12 J.W.Vann - from Okie 109839

- - from dan and sue 0I3504

- B 1939 B WE ARE PLANING A TO RESTORE THIS ONE - from CHUCK RACE & CHRIS JACKSON 0I3504

- 4W-305 WINTER PROJECT - 4 WHEEL DRIVE, HYD STEER - from HARRY DUBACH 0I3504

- UCLPWF A combination you don't see everyday - from cdmn 0I3504

- 1959 D-17 FOR SALE - $4395 - 260-589-8222 - from HARRY DUBACH 0I3504

- WC Model of a WC Speed Maintainer - from Armand (IA) 057697

- 519 - from TIM 432469649

- WC Calvin Schmidt's Speed Maintainer - from Armand (IA) 057697

- WD More bragging on my kids! - from Adam Davis - NC 035676

- WD Gotta brag about my kids! - from Adam Davis - NC 035676

- - from 035131

- IB Model of an IB - from Armand (IA) 057697

- 7050 - from Michael A (CO) 0I3504

- d_15 - from 102341

- what are these - from Steve Hammond 102341

- What are these? - from steve Hammond 102341

- D-21 Model of a D-21 Industrial - from Armand (IA) 057697

- Oxnard wheel weights??? - from Eldon (WA) 025090

- 82 - from Eldon (WA) 025090

- D12 Fired up after long winter - from Roland (MA) 102813

- WC Old footbrake conversion on my 38 Nice job don't know who madeit.works good - from Roland (MA) 102813

- D 17 Allis D17 on the job - from Neal (sc MN) 068767

- G Project is coming to an end - from Niels den Boer 0I3504

- First chips off our "new" lathe. - from C Tucker NW IL 088614

- WD Work Station - from K. T. Novak 098915

- WD Tag On Loader - from K. T. Novak 098915

- AC Loader Tag on Loader - from K. T. Novak 098915

- WD Manifold - from K. T. Novak 098915

- WD - from K. T. Novak 098915

- - from sumerix 0I3504

- d21 - from sumerix 0I3504

- Allis toy tractors - from Tony & Barb 051270

- 180 Slightly modified puller owned by Scotty Barr - from Tyler Knight - Newcastle,ON,Canada 0I3504

- B front axle weights on an adjustable front B - from Eldon (WA) 025090

- CA new paint - from captaindana 237747147

- CA just finished painting her - from captaindana 237747147

- WC This is my April Fools joke! - from Tom Miller 073316

- wd 45 Plow day in Greenview, IL. - from John 0I3504

- Allis CA 1953 Allis CA for Sale (309) 475-2323 - from Steven Beatty 0I3504

- 8050 - from sumerix 099752

- 210 - from sumerix 099752

- 8010 - from sumerix 099752

- XT-190 XT After Paint - from Ray Sullinger 0I3504

- XT-190 XT Before Paint - from Ray Sullinger 0I3504

- 190XT Is this Were you connect the two drain plug for the oil to stay the same in the transmission and hydralic oil compartment - from Scott Williams 497590484

- WD WD apart again - from Rob (PA) 0I3504

- WC Adj WF Would like any info on 1947/48 AC Factory Adjustable WF or casting # AM43211 - from Ed Mills 098422

- 7060 fresh 1981 7060 ready for a new home - from denny 089464

- wide front CA - from Eldon (WA) 025090

- Gleaner GraveDigger - from Holstein50 0I3504

- B-112 This is my 1962 Allis Chalmers B-112. As you can see the poor thing is in pieces. - from Steven 266588586

- MODCCULT MOUNTING OF ALLIS C CULTIVATOR - from AJ 087231

- wd45 The parts tractor lives 2 - from Jerry (mo) 0I3504

- wd45 The parts tractor lives - from Jerry (mo) 0I3504

- AC Hauler Spotted south bound on US31 in Kokomo, IN, 29-Mar-2005 - from dep5 (IN) 0I3504

- Points saving ignition circuit - from Jay Miller 0I3504

- this will be done for the parade next month - from Seabee on AC 027891

- 3rd AC done since last May...this will be done this weekend. - from Seabee on AC 027891

- Is this a cultivator mount for a C-B or CA ? If so does anyone have photos of how this contraption hooks up - from 027891

- D-17 D-17 - from Andy Elliott 084738

- D-17 IV Series IV brought home on 3/28/05 - from Andy Elliott 084738

- Logo New style triangle logo in cast aluminum for hitch - from Andrew/IN 0I3504

- Logo Old Style logo in a Reese hitch receiver I have been casting - from Andrew/IN 0I3504

- ? Spare parts - anyone? - from John 097167

- WC Hawaii Style....Coffee Farming in Kona, Big Island - from Henry Williams 0I3504

- Gleaner Old Gleaners never die - from Holstein50 0I3504

- d17 d17 for sale - from phil brown 762311529

- D19 Front and rear view of the restored D19 - from Tim 0I3504

- D19 Here is the other view and an up close look at the restored D19 - from Tim 0I3504

- D19 Restored D19 - from Tim 0I3504

- D19 restored D 19 - from Tim 0I3504

- D17 Here is another shot of the D17. It has seen better days. - from Mike 762607122

- D17 The company Allis Chalmers D17 with loader. I wish they would spend more money on up-keep for it. - from Mike 762607122

- The other side... - from Eldon (WA) 025090

- 45 diesel what is th wood for - from dave (oh) 432593891

- 1944 WC Left over parts, some still good, if anyone's interested. - from Tom MN 0I3504

- - from 090836

- My 53 WD and #40 SC disc.....and new house - from Eldon (WA) 025090

- 1953 WD45 Char-Lynn power steering with a Saginaw pump. - from Dave Grubb 096772

- Rocky A recent forumn discussion about dogs and skunks reminded me of this 1973 picture. Rocky had never seen a porcupine before, and he got a rude introduction. We were in very rural Wyoming, far from any vet, so there was no anesthetic. My mom and her three sisters piled on and held him down, while I operated the pliers. Ouch! - from Steve Jelf 053284

- Light Auxilary warning light - from Joe O 237567905

- AC Book Excellent Book. My brother loaned it to me. Thanks A lot Norm Swinford! - from Mike Folkers 762607122

- 200 Another angle. I had to make the decal for the steering column because the decal manufacturer got cheap and doesn't make it anymore. - from Mike Folkers 762607122

- 200 The AC 200 I repainted. I was going to sell it on Ebay but since it turned so nice I decided to keep it myself. - from Mike Folkers 762607122

- My Allis Chalmers Hauler - from D Buck (VA) 0I3504

- - from 094139

- Trailer My new A-C hauler - from Mark 068258

- New Traction Booster Gauges - from Matt Folkers 0I3504

- Allis plow?? - from 0I3504

- Paulson For the guys wanting a look at how a Paulson loader mounts up. - from Kevin in NE 0I3504

- JD 60 I wonder if the person who drove it last realized that he would have to bring a chainsaw to drive it away the next time - from Vatsboy1999 762607122

- JD 60 A bad picture, but if you look closely this tractor has sat so long that it has trees totally surronding it. - from Vatsboy1999 762607122

- JD 60 A John Deere 60 Surronded by trees - from VatsBoy1999 762607122

- ? - from 0I3504

- Diesel gauge pod on WD gas - from Eldon (WA) 080887

- starting restoration - from dave barnes 432593891

- Model B Pretty girls and Allis-Chalmers, You just cant beat that combo. - from Royp/MI 093526

- Model B Dead weight pullin - She just wont quit - from Royp/MI 093526

- Model B Another pic of the Wifes day off - Shes a keeper. - from Royp/MI 093526

- 1959 D14 My brother pulling a D14 hard last fall - from Darrell Jr, (MN) 079088

- - from 094139

- Model B My wife opening a can of whoop A$$ - from Royp/MI 093526

- Grandson Andy with his first tractor - from Tony & Barb 051270

- D-21 My birthday present to myself - from Adam in VA 0I3169

- 1938 The elusive belt pulley for my A thanks to Chuck Dornbush - from John (C-IL) 073379

- Mowers 2 lets try this again - from DeanIA 070762

- Mowers Simplicity mowers in front of Marzolf imp Spring Valley MN during last Fridays storm! - from DeanIA 070762

- WD right side view of parts tractor - from cdmn 0I3504

- G My AC G Collection. - from Phil Leckrone (St. Louis) 078180

- G Front View of the Finished AC G Restore! - from Phil Leckrone (St. Louis) 078180

- G Finished AC G with Fertilizer and Corn Planter - from Phil Leckrone (St. Louis) 078180

- 720 720 after day of cleaning out flower beds - from Joe O 237567905

- Oil Pull Half size Oil Pull - from cdmn 0I3504

- Plastic bearing....where is it used?? - from Eldon (WA) 025090

- Why did AC put this weird fan on the D17 and D19? - from Eldon (WA) 025090

- Just says 6 inch on it....silo blower pipe clamp??? - from Eldon (WA) 025090

- Roto baler part....where does it go on it? - from Eldon (WA) 025090

- MB plow parts, do they go together or separate? - from Eldon (WA) 025090

- Moldboard plow parts....where do they go? - from Eldon (WA) 025090

- M AC In New Zealand, museum Geraldine - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- U AC In New Zealand, museum Geraldine - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- No.3 just a S/C subsoiler - from John 081604

- No.3 my new toy - from John 081604

- CA CA mount brackets for No. 3 mower - from Mike Noonan 064621

- D17 Snow and should be spring! - from Neal (sc MN) 068767

- Here it is! - from john(MI) 086682

- 7080 - from Brad 0I3504

- B This would look better - from CH 094237

- 1952 WD should I replace or grind and reuse? - from Kerry Thomas 073882

- 1952 WD almost tore down - from Kerry Thomas 073882

- 7080 trying out the 7080 - from Brad 0I3504

- My other money pit - from Burt Byers 091941

- 190XT jacks 190 XT getting clllooossseeerr - from denny 089464

- Strange cast centers on 28 pa wheels??? - from Eldon (WA) 017320

- Model B Spiral on B crank 1939 - from Royp/MI 093526

- Model B Crank shaft oil seal sleeve. - from Royp/MI 093526

- - from 092490

- 60 For Sale - from klm (MO) 053099

- - from Dennis Anderson 090836

- Oxnard 9' snap coupler blade - from Eldon (WA) 017320

- Model B Best looking at most shows - from Roy Patterson 093526

- WD Ready to paint - from Drew 762051944

- AC 440 Getting Ready for paint & final assembly. - from Stanton Farms 080938

- AC 440 Getting ready for paint & final assemlby. - from Stanton Farms 080938

- - from 093419

- - from steve ,australia 092573

- chamberlain tractor - from steve 092573

- - from 093419

- Pic from Brian OH....what is it?? - from Eldon (WA) 080887

- not a allis but a deere - from 762313078

- Heading to Aitkin, MN - from Neal (sc MN) 068767

- 50 On the #50 the brackets that hold the moldboard to the frame, runs straight down. - from Dennis Anderson 090836

- 60 On the #60 the brackets that hold the moldboard to the frame, runs down at a forward angle - from Dennis Anderson 090836

- 70 The #70 Has more clearance than the #60 & has a ball up on the tilt crank - from Dennis Anderson 090836

- 80 The #80 Has spring trips on each bottom - from Dennis Anderson 090836

- Sale Brochure For Boiler Unit - from Dennis Anderson 090836

- 2000 sq. ft. Farm House That Was Built In 1841 - from Dennis Anderson 090836

- Cellar Steps Used As A Holding Bin About 82 Bu. - from Dennis Anderson 090836

- Cellar Steps Used As A Holding Bin - from Dennis Anderson 090836

- Cellar Corn Chute - from Dennis Anderson 090836

- Corn Furnace - from Dennis Anderson 090836

- Fire Pot - from Dennis Anderson 090836

- fd 3 FD3 built in france by vendeuvre restaured in 2003 in original configuration - from jean pierre 0I3504

- Allis Chalmers generator with Buda engine...and Tony - from Tony & Barb 051270

- 8070 twins anyone - from denny 089464

- 8070 Pinckney Thompson pair leaving - from denny 089464

- 2000 Chris wanted a plow also - from denny 089464

- 7040 chris before and after - from denny 089464

- 7040 Hey Chris 1977 again - from denny 089464

- 1935 UC Come on Summertime! - from Jerry Jones 0I3504

- 1935 UC Cain't wait to go to a show with her! - from Jerry Jones 0I3504

- 1935 UC Orange in Indiana - from Jerry Jones 0I3504

- 1935 UC Nice Orange Paint - from Jerry Jones 0I3504

- clipper has anybody ever used or seen one of these - from Adam D 0I3504

- clipper - from Adam D 0I3504

- 1952 WD This was the tractor that my grandpa farmed with in the 60's and the early 70's. I restored it about six years ago. It has a WD45 motor in it. - from Adam D 0I3504

- 1952 WD This was the tractor that my grandpa farmed with in the sixties and the early seventies. I restored it about six years ago. - from Adam D 0I3504

- 1952 WD Does anybody know what kind of manifold this is. It was on the tractor when I first restored it so we left it. - from Adam D 0I3504

- All Crop This is the all crop that my grandpa used in the sixties. Unfortunately rust has taken most of it. - from Adam D C IL 0I3504

- All Crop - from Adam D 0I3504

- 210 210 that came from denny. - from Bruce IA 0I3504

- homemade puller diesel loco! - from steve 092573

- - from steve 092573

- homemade puller - from steve ,australia 092573

- this might upset some people! - from steve 092573

- - from steve 092573

- - from steve ,australia 092573

- some pics from rally in south australia - from steve ,australia 092573

- Tobacco incinerator for D14, D17 NOS - from Eldon (WA) 017320

- Help identify laminated wood split wood ring - from Eldon (WA) 017320

- AC IB Working with my IB with Ottawa Loader - from Alan (SE Iowa) 0I3504

- 220 Trying to keep up with the Jones, OOPS the Bergman farms - from LARRY KAHLE 0I3504

- AC Blanket for GOTO - from For Deanne 087966

- versatile new stock - from Jeff 0I3504

- versatile inside Versatile factory new 535 hp tractor - from Jeff 0I3504

- versatile not Allis, but the pride of Winnipeg Canada - from Jeff 0I3504

- I400 We've got just a little snow - from Mike R. in Maine 658175416

- H3 My snow plow - from Mike R. in Maine 658175416

- 7040 Heres a pic of the 7040 on the truck figured Id post while all is working.with the archive - from chris J OH 092425

- D15 - from Tim 0I3504

- 1950 CA My winter project - from Lester at wcmo 0I3504

- my orange line up - from alliboy 658177009

- d-21 after restoration - from allisboy 658177009

- d-21 before restoration - from allis boy 658177009

- d-21 1968 series 2 pic 5 - from allisboy 658177009

- CA close up - from Leon Burkemper 062251

- CA receiver hitch - from Leon Burkemper 062251

- d-21 pic 4 - from allisboy 658177009

- d-21 1968 d-21 pic3 - from allisboy 658177009

- d21 D21 pic 2 - from allisboy 658177009

- d21 D-21 in my driveway - from allisboy 658177009

- D 17 New Hitch for 3 point - from Neal Breitbarth 068767

- D 17 New Hitch for 3 point - from Neal (sc MN) 068767

- wd 45 Plowing fun - from John 091058

- D19 This is Gene's D19. I am using it to haul shit while my 180 is in the shop. Sometimes it is rough riding down by the pivot. - from Shit Hauler 762607122

- - from Dean Berning 0I3504

- 200 My Dad's 200. It was recenlty overhauled. My brother did some touch up painting on the tires and underneath but it is moslty original paint yet. - from Mike Folkers 762607122

- R-42 This is my Dad's R-42. He bought it new in 1996. I know it is not an Allis Chalmers but it is one of the relatives. Before that he had a F2 and M2. - from Mike Folkers 762607122

- 8030 This is my Dad's 8030 hibernating for the winter. He bought it new in 1985. It was one of the last tractors that Allis Chalmers made. It had the Deutz-Allis cover up decals on it. A few years back they fell off and underneath was Allis Chalmers in big bold letters. Needless to say nobody bothered to put the disgusting Deutz Decals back on it. - from Mike Folkers 762607122

- CA CA in my driveway - from allisboy 658177009

- D-21 1968 D-21 pulling a steamer at the GOTA in NY - from allisboy 658177009

- wd45 stays for 3pt - from iamdes 0I3504

- 80S - from 0I3504

- M2 test - from Michael A (CO) 0I3504

- WD Picker tractor - from JC(WI) 086940

- WD Temp gauge on WD - from JC(WI) 086940

- AC-C This is my son's first ride on our C. - from C 031239

- IH 303 1971 picture of dad during corn harvest - from John (C-IL) 073379

- D crew with 930E Komatsu at Barrick Goldstrike (Nv) - from Rick (NV.) 0I3504

- NEW push rods for D-10, D-12, D-14, D-15 - from Tony & Barb 051270

- CAT 966 HERE'S THE CUT - from TIM 432469649

- CAT/JD MY BOY & ME - from TIM 432469649

- CAT/JD MY BOY CAME UP FOR LUNCH - from TIM 432469649

- CAT/JD PUSHING SNOW OUT OF A CUT SH133 JUST SOUTH OF MARBLE COLORADO - from TIM 432469649

- 80R Attaching Parts - from Dennis Anderson 080102

- truck This is our rig - from Bergman Farms: KS 0I3504

- Notice the Siemens AC logo of the on the side view of this haul truck used in a gold mine in Ne.Nv. - from Rick (NV.) 0I3504

- 8050 8050 getin ready for spring - from ac nut 072744

- - from Chad(NEWI) 0I3504

- '55 SC B The '55 B is getting close! - from Brad MI 087817

- '55 SC B another, w/Jan - from Brad MI 087817

- '55 SC B IT LIVES! - from Brad MI 087817

- - from Chad Christiansen 0I3504

- 7080 Another shot of the 7080 - from Bergman Farms: KS 0I3504

- 7080 This one showed up this weekend (factory 30.5 rubber) - from Bergman Farms: KS 0I3504

- 1943 WC Snowy Yard Art... Spare parts WC at the end of the barn - from Rob Klepinger 071487

- Model 8 Model 8 Loader Manual Cover - from Dennis Anderson 080102

- Found this in a NOS parts envelope! - from Eldon (WA) 017320

- NOS Donaldson air cleaner For Sale - from Eldon (WA) 017320

- 3/4" slotted bolt for?? - from Eldon (WA) 017320

- Where is this pto shaft used? - from Eldon (WA) 017320

- This is a filtered fiting...where is it used? - from Eldon (WA) 017320

- Collar used where?? - from Eldon (WA) 017320

- Snap coupler holes for both wide and narrow arms - from Eldon (WA) 017320

- Plow? Side view - from Dwayne TX 087991

- Plow What model? - from Dwayne TX 087991

- Allis lined up after plowing - from Jim se Il 068693

- house pic of my house for Dan (OH) - from Roger (OH) 622973050

- 210, 220 Unloading some toys and parts - from Bergman Farms: KS 0I3504

- 210, 220 These two will fit right in with the rest of of the 210s and 220s - from Bergman Farms: KS 0I3504

- 220, 210 Unloading some new toys - from Bergman Farms:KS 0I3504

- WF 1949 For Sale - from Mike Ontario 0I3504

- CA Timing Info From Manual - from Dennis Anderson 080102

- ALLIS - from BRAD 266504656

- B snap coupler parts - from Eldon (WA) 080887

- D-272 ALLIS D-272 - from 0I3269

- Series70 Lets Plow! - from Tom Yaz 027822

- U AC slide from 1954 zoom in on uncle's U Allis, not sure of model year - from Tom MN 0I3504

- U AC color slide from 1954. A couple AC tractors U and WC - from Tom MN 0I3504

- 1944 WC Slide from 1953. Zooming in on the tractor, it looks like the horse is checking out the battery box. - from Tom MN 0I3504

- 1944 WC Scan of color slide taken in 1953 - from Tom MN 0I3504

- D 21 - from Brad Stemle [KY] 0I3504

- D 21 Just thought I'd add another pic - from Brad Stemle [KY] 0I3504

- A This is a tractor? - from Butch(OH) 087629

- 311 SKF bearing box - from Butch(OH) 087629

- U AC In New Zealand - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- bonnet AC In New Zealand - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- ..... enough to restore outside!! - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- M AC In New Zealand - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- wd45 AC In New Zealand - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- U AC in New Zealand - from Joep van de Bool, joepnaer@hotmail.com 0I3504

- 8070 This movie has a lot of AC tractors in it and a vintage 1980's dealership scene. - from Mike Folkers 762607122

- ORANGE IS POWER! A line of A-C's waiting to pull @ Wausa, Ne. summer of 1976. - from Matt Folkers 0I3504

- 190XT Dad pulling his 190XT in summer 1972, first place, 13,000 lbs. class. - from Matt Folkers 0I3504

- 190XT Dad's XT loaded down with weights to make the 13,000 lbs. class, summer of 1972. - from Matt Folkers 0I3504

- 190XT Dad's XT parked in grandpa's lane, June of 1971. Dad has a Nebraska Cornhuskers '71 Championship bumper sticker on the weight bracket. - from Matt Folkers 0I3504

- 190XT Dad and his new 190XT in the fall of 1967. - from Matt Folkers 0I3504

- Generator At Hoover Dam - from DanD. 0I3504

- Allis Chalmers generatos @ Hoover Dam - from Matt Folkers 0I3504

- all crop for sale - from Leon Burkemper 062251

- Red Rider - from Eldon (WA) 080887

- Gleaner E don't get too close - from DanD. 0I3504

- E Gleaner I only wish I could post the sound! - from DanD. 0I3504

- Morning Moon - from Eldon (WA) 080887

- 190 xt this is the 190xt im workn on - from mike (ar) 048169

- B 1948 Drove for the first time today. It did not rain on my parade, this day in Calif. I'm also a 1948 as is plain to see! - from Ron Latronica 762440659

- D 15 New suit of clothes on the D 15 - from Dave in Oregon 147273

- Long single rake tooth - what rake did it go to? - from Eldon (WA) 080887

- Oops...here is the odd gear - from Eldon (WA) 080887

- Odd gear - from Eldon (WA) 080887

- Looks familiar but need help identifying - from Eldon (WA) 080887

- G OEM - Allis Chalmers Oil Filter on AC G Restore Project - from Phil Leckrone 078180

- Mess of lights - from Eldon (WA) 080887

- B Snap coupler B - from Butch(OH) 0I3504

- plow Correct coulters - from Eric from Ohio 761834988

- plow Correct coulters? - from Eric from Ohio 761834988

- Eldon's Mystery Part explained - from Skyhighballoon (MO) 0I3504

- 7020 Need to sell! - from Tom in MI 498605557

- Anyone interested in some parts bags?? - from Eldon (WA) 080887

- NOS tie rods, what tractor used ones with big notches? - from Eldon (WA) 080887

- Used sway block for??? - from Eldon (WA) 080887

- sway blocks for???? - from Eldon (WA) 080887

- 20 inch rims - from Eldon (WA) 080887

- Rear wheel spacers - from Eldon (WA) 080887

- Turbo shaft for?? - from Eldon (WA) 080887

- Plow shins....can't find a number on them - from Eldon (WA) 080887

- Look like sickle knife heads for combine?? - from Eldon (WA) 080887

- Wheel release bolts?? Found in toolbox below - from Eldon (WA) 080887

- Short pto shaft - what's it fit? Small spline on machine end - from Eldon (WA) 080887

- mystery part - from Eldon (WA) 080887

- Mystery part, hollow tube w/spring inside -tapered ends compress into spring (1 pr) - from Eldon (WA) 080887

- Another view - from Eldon (WA) 080887

- NOS hood - what's it fit? - from Eldon (WA) 080887

- NOS 4x8 cylinder - from Eldon (WA) 080887

- Mystery tube with wobble flange - from Eldon (WA) 080887

- Energy cell?? - from Eldon (WA) 080887

- Here's the fender to go with toolbox - from Eldon (WA) 080887

- Which tractors used this toolbox? - from Eldon (WA) 080887

- Mystery clutchplate - what does it fit? - from Eldon (WA) 080887

- Finally moved in... - from Don OH 0I3504

- For all who are dealing with the snow - from Tony & Barb 051270

- WD 45 snap couple release - from Olen 068142

- 1950 G Final oil filter is painted with decal - from Pete K CA 059009

- 1950 AC G Looks better without the hood. - from Pete K CA 059009

- D 17 For Sale D17 - from Neal (sc MN) 068767

- D17 For Sale D17 - from Neal (sc MN) 068767

- A-C Lined up and ready to plow - from Butch(OH) 0I3504

- A-C The A-Cs lined up and ready - from Butch(OH) 0I3504

- WC Allis Found this setting in the woods - from PaulK(IL) 0I3504

- D 15 D15 w ldr all original except seat - from Jim Sloane 0I3504

- D15 D15 w ldr all original - from Jim Sloane 0I3504

- D 15 1963 D15 w/ldr all original - from Jim Sloane 0I3504

- for Joe... - from tony carbaugh 061714

- mule again - from tony carbaugh 061714

- mule - from tony carbaugh 061714

- the mule...for Joe - from tony carbaugh 061714

- 900 ton forge press crankshaft - from C Tucker NW IL 063873

- Our new lathe - from C Tucker NW IL 063873

- our new lathe - from C Tucker NW IL 063873

- wd45 1954 wd45 for sale gubb02@yahoo.com - from andrew 0I3504

- 1954 wd45 1954 wd45 for sale gubb02@yahoo.com - from andrew 0I3504

- 2X Plow - from Lloyd W. KY 085957

- I just picked this up last week. I have wanted it since I was 10 years old. I wish it had color photos. - from Mike Folkers 762607122

- - from 762607122

- Part Would like help on part identification - from Joe O(C MO) 063780

- L Ma's model L; for sale. - from Shane'r 0I3504

- - from brian rees australia 0I3504

- 170 Front fender mounts - from Chad 078420

- 170 Front fenders - from Chad 078420

- 170 - from Chad 078420

- 170 Rebuilt 170 with front fenders - from Chad 078420

- 8070 about ready to go to south carolina - from denny 0I3504

- 8070 ready to go to south carolina - from denny 0I3504

- 8070 8070 going to south carolina - from denny 0I3504

- 8070 ready to go to s.c. - from denny 0I3504

- sleeve drivers made out of old car axles - from steve fischer 078352

- B I would like to find out the year, make,model,references and any othe info about the potato digger in the photo. The picture was taken in 1942. Thanks - from Mark 082427

This pages lists the 500 newest photos.
To see the entire archive [CLICK HERE]