How to Adjust Brake Pedals HD9
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=94962
Printed Date: 28 Apr 2024 at 9:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: How to Adjust Brake Pedals HD9
Posted By: BillRO
Subject: How to Adjust Brake Pedals HD9
Date Posted: 10 Sep 2014 at 6:03pm
Please give me Advice on how to Adjust the Brake Pedals on a HD9, Thank you for your Help 
|
Replies:
Posted By: Ray54
Date Posted: 10 Sep 2014 at 10:41pm
|
Clean the rear case under fuel tank,shoud be a cover bolted on (been a long time don't remember how many bolts or size)slide cover back.The adjuster is right there,tighten until you cannot bottom out the pedal. |
Posted By: gemdozer
Date Posted: 11 Sep 2014 at 5:10am
| Like RAY54 said remove the small cover on the stering cluch compartiment cover under the fuel tank and turn the brake adjuster clockwise until the brake pedal has 1 3/4" to 2" free travel |
Posted By: BillRO
Date Posted: 11 Sep 2014 at 5:56am
 Thank you
|
Posted By: BillRO
Date Posted: 11 Sep 2014 at 5:57am
|
Thank you For Confirming RAY54 and giving More DETAILS
|
Posted By: Mactractor
Date Posted: 11 Sep 2014 at 4:44pm
| The dry clutch tractors also have a set scew up through the bottom of the housing which touches the bottom of the brake assembly. After adjustments, you take it up tight then back off I think one and a half turns. Its purpose is to prevent the top linings dragging on the drum when the pedals are back. Many of those have been thrown away leaving a hole for dust an mud to get into the housing |
Posted By: BillRO
Date Posted: 18 Sep 2014 at 5:54pm
| Thank you Mac |
Posted By: BillRO
Date Posted: 18 Sep 2014 at 5:55pm
| Thank you |