Print Page | Close Window

M&W decals...

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=56329
Printed Date: 25 Apr 2024 at 7:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: M&W decals...
Posted By: AndyL
Subject: M&W decals...
Date Posted: 04 Sep 2012 at 1:31pm
Started on my WD45 project this weekend, got it running, and now the next step is new paint, But I'm wondering where do I get the m&w piston decals at ?

-------------
Allis Wd45 190XT 6060 Case 930 1070 1270 Deere 630 .Ford 3000,,1979 Gleaner F2 1978 F2...



Replies:
Posted By: Fred in Pa
Date Posted: 04 Sep 2012 at 2:48pm
One like this  ?.  This was out of 1 of 6 kit's that i bought one time pistons are all gone .Only have this decal..


-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
Just because you do not have the tools for job , it dose not make it a bad design.


Posted By: injpumpEd
Date Posted: 04 Sep 2012 at 9:36pm
I have some of those decals too................somewhere! lol!



-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!


Posted By: redline
Date Posted: 04 Sep 2012 at 9:51pm
There was a member here that made some "Orange Cap Service" decals for some of us a while ago. They were very nice. I imagine he could reproduce those without too much trouble. The business card he sent has the name Blair Signs on it, and he is/was from Oklahoma. I wouldn't be surprised if there are more folks looking for the very same decal.

-------------
If it weren't for the last minute, I wouldn't get anything done!


Posted By: Kip-Utah
Date Posted: 04 Sep 2012 at 10:18pm
I would also like a couple of these decals! Kip

-------------
HANSEN'S OLD ORANGE IRON. Showing, Pulling, & Going!!


Posted By: dt1050
Date Posted: 05 Sep 2012 at 5:37am
most any sighn shop can remake them, they will have to alter it just a bit as to not infringe on the copy write. just snap a pic, tell them the size and they should be able to make something up.


Posted By: Lonn
Date Posted: 05 Sep 2012 at 5:43am
For small time I would ignore any copy write until someone comes after you. They won't.

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot


Posted By: redline
Date Posted: 05 Sep 2012 at 8:02am
If the recreations are good enough, they will never know the difference.
(That statement is mostly tongue-in-cheek)


-------------
If it weren't for the last minute, I wouldn't get anything done!


Posted By: Bud(WI)
Date Posted: 05 Sep 2012 at 6:49pm
I think these might be the guys that were at the Rock River Thresheree.  They had the orange cap decals and would customize them.

http://maplehunterdecalstexas.com/" rel="nofollow - http://maplehunterdecalstexas.com/  



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net