Farm Equipment - C Allis Starter

Print Page | Close Window

C Allis Starter

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=47424
Printed Date: 26 Apr 2024 at 5:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: C Allis Starter

Posted By: Ricky G
Subject: C Allis Starter
Date Posted: 16 Mar 2012 at 11:07pm

will a wd starter fit on a c

Replies:

Posted By: skipwelte
Date Posted: 16 Mar 2012 at 11:24pm

The nose will have to be re-indexed. There is a locating pin that will have to be removed to allow the nose positon to change.

Posted By: Dick L
Date Posted: 17 Mar 2012 at 8:10am

The started drive will have a different tooth count.

Posted By: jaybmiller
Date Posted: 17 Mar 2012 at 9:11am

I've got a C starter here that would probably fit though.....

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: Ricky G
Date Posted: 17 Mar 2012 at 1:21pm

Thanks i just took mine to the
rebuilder this morning said he could
fix it its a autolite have never rebuilt one have always been delcos
said he would adapt a different switch as the oem switches
are hard to find and pircey to

Posted By: Steve in NJ
Date Posted: 17 Mar 2012 at 10:33pm

You're probably better off switching over to a Delco. Stick with the B,C,CA starter motor. Less problems adapting. The Autolite's are getting tough to find parts for, and pretty soon the parts will be extinct. Parts are plentiful for the Delco's, so there wouldn't be any problems repairing that unit down the road....
Steve@B&B