paint color for wd
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=42079
Printed Date: 26 Apr 2024 at 2:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: paint color for wd
Posted By: gman11110
Subject: paint color for wd
Date Posted: 13 Dec 2011 at 7:27pm
|
i am in the process of restoring my 49 wd anyone know the correct original color. i did my 52 wd in persian orange. don"t know if it is same or not thanks |
Replies:
Posted By: CTuckerNWIL
Date Posted: 13 Dec 2011 at 7:31pm
|
Persian Orange 1, there was a later Persian Orange 2 from some time after the D series started. PPG paint code is 60080 for number 1 if that helps.
------------- http://www.ae-ta.com" rel="nofollow - http://www.ae-ta.com Lena 1935 WC12xxx, Willie 1951 CA6xx Dad bought new, 1954WD45 PS, 1960 D17 NF |
Posted By: Redwood
Date Posted: 26 Jan 2012 at 11:03am
|
I have seen lots of posts on the correct paint colour for persian orange 1 and PPG60080 does seem to come up the most. Can anyone post a pic of their tractor that has painted this colour?
I'm about to order my paint and if it is as easy as that it would be nice. I have two orginal samples of the colour that have been untouch that I could have scanned but one was protected from light and kept dry and clean and the other has been sealed under a grease layer and they are slightly different. I have also heard about the florecent problem and don't want to scan the chip under one light then have it look like crap outside. So I'd like to order the PPG60080 but would like to see it before I order. As people have different opions how things look it would be nice to see what This looks like.
|
Posted By: Goose
Date Posted: 26 Jan 2012 at 11:26am
I recently painted this blade with PPG60080. But it can vary on your monitor with your settings. I wouldn't hestiate to use this paint on your tractor.
|
Posted By: Redwood
Date Posted: 26 Jan 2012 at 11:39am
|
Thanks
That does look good.
off to get it ordered
|