AC 200
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=24540
Printed Date: 03 May 2024 at 4:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 200
Posted By: JOHN N/IL
Subject: AC 200
Date Posted: 23 Jan 2011 at 6:51am
| Does anyone have a wiring diagram for a 200 ac with a cab ,my brothers manual doesnt show wiring for cab.The instrument panel is a litttle different.Were trying to get the lights going on it .It looks like a rats nest in there.Someone previous buctchered the harness also.Its the electrical print usually in the back a the service manual.Any help would be helpful thanks. |
Replies:
Posted By: John D
Date Posted: 23 Jan 2011 at 8:26am
| I have the operator's manual for serial number 200-4001 & up and have scanned the wiring diagram. If you would like, I can email it to you. |
Posted By: JOHN N/IL
Date Posted: 23 Jan 2011 at 9:59am
| Thanks alot i will be glad to look at it.email should be in the member panel,if not let me know.thanks john |
Posted By: John D
Date Posted: 23 Jan 2011 at 10:12am
| I looked but it showed your email as private so I'll send you an email with my info - John |
Posted By: John D
Date Posted: 23 Jan 2011 at 10:20am
Here is the diagram. |
Posted By: JOHN N/IL
Date Posted: 23 Jan 2011 at 10:48am
| Thanks john i looked it over and its not the one i need ,the cab 200 has two light switches on the instr. panel.It has one for turn signals and hazard lights,and one for low beam and high beam.thanks for trying.I appreciate your input. |
Posted By: Dave (Mid-MI)
Date Posted: 23 Jan 2011 at 12:56pm
|
This should be the correct diagram. Hope my link works, I just learned to do this yesterday. dave
http://i1187.photobucket.com/albums/z384/DaveWD45/200wiring.jpg - http://i1187.photobucket.com/albums/z384/DaveWD45/200wiring.jpg
|
Posted By: JOHN N/IL
Date Posted: 24 Jan 2011 at 7:41pm
| thanks dave thats the right one .As long as the wires coming from the instrment panel are ok now.Just curious do you have a 200 and how do you like it.Do you have the print for the panel |