shuttle clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=200847
Printed Date: 18 May 2024 at 9:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: shuttle clutch
Posted By: usingdos
Subject: shuttle clutch
Date Posted: 12 Apr 2024 at 8:26am
|
Hi, i have an old i600 forklift that is stuck in reverse. the piece on the clutch that connects to the lever to move it in and out of gear has come off the clutch assembly. i was wondering if i can just shave the piece down so it tightens back on or if that would work at all. or does it need a whole new shuttle clutch housing/assembly? this is not my picture since i didnt have any currently on my phone. just one i found. but the piece circled is what i am referring to. Thanks!  |
Replies:
Posted By: DrAllis
Date Posted: 12 Apr 2024 at 8:33am
| You'll need a new brass collar for sure and possibly the steel piece underneath it. |
Posted By: usingdos
Date Posted: 12 Apr 2024 at 8:57am
|
the steel piece is pretty messed up looking. finding parts has been my biggest stopping point. do you know where i could find those? |
Posted By: DrAllis
Date Posted: 12 Apr 2024 at 10:38am
| Probably the best you can hope for are good used parts from any farm tractor. D-14-15-17-19. I doubt very much anything new is available anymore. Lots of salvage yards around the country. |
Posted By: usingdos
Date Posted: 12 Apr 2024 at 12:02pm
|
thats what i figured. im so used to cars and being able to find things so easy. this has been interesting. thank you for the help!
|