Allis Chalmers CA
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148881
Printed Date: 29 Apr 2024 at 10:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis Chalmers CA
Posted By: NCACCA
Subject: Allis Chalmers CA
Date Posted: 28 Mar 2018 at 3:10am
|
Hey guys I'm new and I just got my first tractor and its a CA and I'm trying to get a list of attachments I could get for it and I just cant seem to find it. One member had a list but nome of the photos load so I can't seem to find anything from it. |
Replies:
Posted By: ac160
Date Posted: 28 Mar 2018 at 5:38am
| Welcome to the site. You can find lots of good information here. Some of the attachments include a blade, plow, disc, mounted cultivators, rear cultivators, dirt scoop, rotary hoe, and planter in snap coupler. If you CA is a pin hitch it is harder to find attachments, but it can be converted to snap coupler. |
Posted By: GregLawlerMinn
Date Posted: 28 Mar 2018 at 8:26am
|
Allis implements are somewhat difficult to come by. If you can't locate those you need, it con ne converted to a 3 point and you can readily find whatever implements you need. ------------- What this country needs is more unemployed politicians-and lawyers. Currently have: 1 D14 and a D15S2. With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC |
Posted By: PaulB
Date Posted: 28 Mar 2018 at 1:09pm
|
Here's a list of the factory built CA implements I have; #52 2 bottom plow #54 2 bottom spinner plow #20 disc harrow (available in various sizes) #40 disc harrow 2 row drill planter 9 run All-Crop-Drill 2 row row-crop cultivators 5 shank coil spring field cultivator 7 foot spring tooth field cultivator 2 disc plow (Athens built for Allis) 4 disc tiller (Athens built for Allis) curved shank Sub-Soiler 7 foot front mounted Snow Plow Trip Bucket Front end loader Rear bladeDirt scoop #5 sickle bar mower #10 post hole digger with the CA mount Carry-All Things I know of but don't have; #30 disc harrow spring tooth harrow 2 row rotary hoe 1 row cotton picker Maybe some other things as well. So you can see that Allis Chalmers built or sold any implement that you could possibly need, most everything was available for the Pin-Hitch tractors, then later they were also available for the Snap-Coupler equipped tractors. This was in my opinion the best lifting and draft sensing system of any tractor of it's time. Searching for the correct equipment to match to your tractor is part of the fun of a unique tractor of the Allis Chalmers brand. If you have the desire to ruin you tractor with a 3pt why did you not buy a Ford or something else? ------------- If it was fun to pull in LOW gear, I could have a John Deere. If you can't make it GO... make it SHINY |
Posted By: Ken in Texas
Date Posted: 28 Mar 2018 at 6:04pm
| Paul B "IS THE MAN WHEN IT COMES TO THE CA ALLIS". Both in the field and on the pulling track. |
Posted By: TMiller/NC
Date Posted: 28 Mar 2018 at 7:38pm
|
Welcome, I have a CA with pin hitch, as AC equipment is scarce around here, I have been messing around with making a 3 point adapter. Which end of NC are you? Tim |
Posted By: steve(ill)
Date Posted: 28 Mar 2018 at 8:12pm
|
well, the first thing to know is what type of hitch / hydraulics / arms are on the back now ? ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 28 Mar 2018 at 8:24pm
???? ------------- Like them all, but love the "B"s. |
Posted By: wfmurray
Date Posted: 29 Mar 2018 at 10:15am
| TMILLER There is more to making a three point hitch than meets te eye .Made one for my B Works ok with finish mower.If you look at a ford hitch is under axle and third arm is not to high above it.I could not get close to these measurements.With custom built ones hitch is so far behind axle you need a lot of front end weight.Picture of mine on customized B . Hope you have good luck .PS I am in sunshine n c |
Posted By: TMiller/NC
Date Posted: 29 Mar 2018 at 8:26pm
|
wfmurray, I'm currently not going to hook to any pto equipment, just working on attaching a 3 point disk. Will post a couple of pics when I am finished. Tim |
Posted By: NCACCA
Date Posted: 22 Apr 2018 at 10:55am
| Hello everyone thank you so much for the replies! I have a 3 point hydro hitch. So I guess it will be easier to get attachments then. By the way my first time ever owning a tractor. So any and all knowledge that I can learn would be great! |
Posted By: CrestonM
Date Posted: 22 Apr 2018 at 11:41am
| If you are looking for implements, I have a 7' CA20 pin hitch disc I would sell. If you are interested, pm me. |