Discuss
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148567
Printed Date: 29 Apr 2024 at 5:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Discuss
Posted By: exSW
Subject: Discuss
Date Posted: 17 Mar 2018 at 12:46pm
|
Replies:
Posted By: DMiller
Date Posted: 17 Mar 2018 at 3:20pm
| Looks rough, possibly cab fire by the darkened skins. Grill for radiator guard is gone but can be manufactured as many have dimensions. Worth asking why it just sits and if can be had on the cheap. |
Posted By: exSW
Date Posted: 18 Mar 2018 at 6:42am
| Runs. Or did. Been on that location for nearly 20 years. Industrial redevelopment. Evry time they sell a lot it gets fired up and it clears the trash. Down to one lot. I think its a 41. At least that's what an operating engineer coworker told me. |
Posted By: CAL(KS)
Date Posted: 18 Mar 2018 at 6:44am
|
hard to tell from that far out but it looks like the FD40's that our stripping contractor has in our quarry. maby 21C? ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: exSW
Date Posted: 18 Mar 2018 at 6:45am
| Reads Fiat Allis on cab and nose. |
Posted By: steve(ill)
Date Posted: 18 Mar 2018 at 7:55am
|
Probably a 31... Has the CUMMINS 1150 straight six with one stack.. 41 would have two stacks.. ..... the rear tank reminds me of the 31, and it had two air cleaners.... the 21C I believe had one.. 31 would be about 425 HP and weight in the 50 ton range without anything bolted on the rear. Blade maybe 14 ft wide and 7 ft tall ?
------------- Like them all, but love the "B"s. |
Posted By: exSW
Date Posted: 18 Mar 2018 at 10:40am
| Blade is quite large. |
Posted By: steve(ill)
Date Posted: 18 Mar 2018 at 7:54pm
|
IF you get close, see if the name CUMMINS is cast into the intake manifold. Should be a straight 6 cylinder. ------------- Like them all, but love the "B"s. |